Filter
Top Products
57
4
1
Insert end A of the USB cable to your PC’s USB
port or USB hub.
2
Connect end b of the USB cable to the cradle.
3
Turn ON the recorder, then set the recorder in
the cradle.
If “REMOTE” is displayed on recorder, it indicates proper
connection.
Connecting to Your PC Using the
Cradle
Connection to Your PC
..............................................................................................................................................................
Notes
• Never touch the contact points at the bottom of the cradle, as that may cause bad connection.
• With a PC connected, the recorder cannot be operated with the foot switch (RS25/26). When connecting
the recorder to a PC via the cradle, remove the foot switch.