Olympus DS-3300 DVR User Manual


 
71
5
When recording voice to be
processed with voice recognition, set
up your DSS recorder as follows to
improve recognition accuracy.
Set the microphone sensitivity to DICT.
( P.27).
Set the recording mode to SP
( P.28).
Set the Variable Control Voice Actuator
(VCVA) to OFF ( P.29).
Register/enroll your voice in the voice
recognition software using the recorder.
Record in a relatively quiet environment.
Have the recorder microphone 5 to 10
cm (2 to 4 inches) away from your chin.
Speak normally.
It is recommended to use the noise-
cancellation microphone, ME12, when
recording.
Dictation files recorded under the
following conditions cannot be
processed by voice recognition
because their recognition accuracy
rates will be very low.
A conference or meeting where many
voices are recorded.
Seminar or lecture where high-level
ambient noise tends to be recorded.
Notes on Recording For Voice Recognition
Using Voice Recognition Software (Optional)