Filter
Top Products
－８０－
11. OTHER PROGRAMMING
11.14 Copying to Other channels
For the parameters, such as [range/printing range], [scale], [engineering unit] and [tag], which are needed to be
programmed in each channel, the parameters of the specific channel as a reference channel can be copied to a
desired channel.
1 Programming Mode …Example of [range/printing range]
2 Programming Flow Chart
<Example> Copying of parameters for [range/printing range] in CH 1 to CH 2 to 4.
Operation screen
[Check]
＋
[To be ready for programming]
[To be ready for copying]
＋
[Programming reference channel]
[Programming copying channel]
Error message appears?
Temporarily stored
＋
Stored
Press or to check if
any skip channel is programmed.
• Programming “to”: +
• Decimal point:
in the next digit
• Deletion of decimal point:
in the next digit
Store the [temporarily stored]
parameters into memory.
(A programming change mark is
printed.)
* Fill unused digits with spaces.
Curso
r
Characte
r
displa
y
Copy channels
Reference
channel
(Fixed)
Character display
Programming
lamp*
* R: Range/Printing range
S: Scale
U: Engineering unit
T: Tag
：For sequential channel
・ ：
For non-sequential channel
Fill unused digits with spaces.
Channel
Cursor
YES
NO
Cursor
Reference channel
Remarks 1
∗
DISP
SHIFT
7
RANGE
SET
END
SHIFT
SPACE
COPY
(
=
)
1
CHART
ENTRY
SHIFT
SET
END
%
/
Storing
Reference 2
Check if any skip channel
is
p
ro
g
rammed
Remarks 1
Various keys
Reference 1
SHIFT
－
(
-
)
・
CLOCK
SPACE
COPY
(
=
)
Keys other than
SHIFT
Ref. 1
Ref. 2
Various
keys