Filter
Top Products
SEARCHING FOR YOUR CODE
If your device does not respond to the remote
control after trying all codes listed for your
brand,or if your brand is not listed at all, try
searching for your code.
NOTE:Before performing a code search for a CD or
DVD player or a VCR, turn on the device and insert
the required media.
For example,to search for a code for your TV:
1. Press and hold SETUPuntil the two bottom
IR segments flash twice.The Program Keys
will appear as SETUP flashes repeatedly.
2. Press SEARCHonce.The Search Codes
programming screen will appear:
3. Press a device key once (e.g.,TV).The selected
device key will animate.The device’s Main
Menu screen will appear with the HOME key
still displayed.
4. Press POWER once to select it as the search
test function. The Search Programming screen
will appear again.
NOTE:With POWER as the search test function, a
“Power On” IR command will be sent to the device
each time a test code is sent.As a confirmation,the
IR segments will display an outgoing animation.
NOTE: If your device or its original remote control
does not have a Power key,select a different test
function in this step (e.g.,CH+,VOL+, Play,etc).
5. Aim the remote control at the device (e.g.,TV)
press ▲one or more times and stop when a
working code performs the test function
selected in step 4.If desired,use ▼ to try a
previous code.
NOTE: In the search mode, the remote control will
send IR codes from its library to the selected device,
starting with the most popular code first.
6. To lock in the code,press OK once. The two
bottom IR segments flash twice.
7. To search for codes of your other devices,
repeat steps 3 to 6, but use the appropriate
device key and test function key for the device
you are searching for.
8. To exit programming,press HOME twice.The
display will return to the last-selected device
menu screen.
CHECKING THE CODES
If you have set up the remote control using the
Searching For Your Code procedure (on the left),
you may need to find out which four-digit code
is operating your equipment.For example,to
find out which code is operating your TV:
1. Press and hold SETUPuntil the two bottom
IR segments flash twice.The Program Keys
will appear as SETUP flashes repeatedly.
continued on next page...
USER’S GUIDE
Searching For Your Code/Checking The Codes 11
OFA Kameleon UG 5/8/03 3:22 PM Page 11