Filter
Top Products
4. Press a device key once (i.e.,AUX,CBL/SAT,
CD,TV,DVD,AUDIO,VCR,or PVR).The selected
device key will animate.
NOTE: Please refer to the Device Table on page 7
when choosing a device key for programming.
5. Use the Manufacturer’s Codes (starting on
page 24) to locate the type of device and
brand name and then use the Number Keys
to enter the first four-digit code for your
device.If performed correctly, the bottom two
IR segments will flash twice.
NOTE: If the bottom two IR segments displayed one
long flash instead,a mistake has occurred.Try
entering the same code again.
6. Aim the remote control at the device and
press POWER once.The device should turn
off.If it does not, repeat steps 5 and 6, trying
each code for your brand until you find one
that works.If it still doesn’t work,try
Searching For Your Code on page 11.
NOTE:If the device does not have a POWER key,
press the (Play) key.
7. If the code works,press OK once.The two bot-
tom IR segments will display one long flash.
8. If desired,repeat steps 4 through 7 for each
device you want to control. If finished, press
HOME twice to exit programming and return
to the last-selected device menu screen.
9. For future reference,write down each
working device code in the following boxes:
AUX Code:
Device Type:_______________________
CBL/SAT Code:
Device Type:_______________________
CD Code:
Device Type:_______________________
DVD Code:
Device Type:_______________________
TV Code:
DVD Code:
Device Type:_______________________
AUDIO Code:
Device Type:_______________________
VCR Code:
Device Type:_______________________
PVR Code:
USER’S GUIDE
Programming Device Control 9
OFA Kameleon UG 5/8/03 3:22 PM Page 9