Filter
Top Products
USER’S GUIDE
Adjusting The Display 13
ADJUSTING THE DISPLAY
Your new remote has several ways to adjust the display for your comfort and
best use.
ADJUSTING BRIGHTNESS
The OFA Kameleon 8-Device Remote with RF has five levels of brightness
adjustment and is set to the middle one at the factory. To increase or decrease
the brightness, perform the following steps:
NOTE: Increasing the brightness of the display can decrease battery life.
1. Press and hold SETUP until the two bottom IR segments flash twice. The
Program Keys appear.
2. Press (Brightness) once.The Brightness programming screen
appears:
NOTE: . If the display turns off because of
inactivity, you must start the programming
sequence again by repeating this step.
• To increase brightness, press
one or more times.
• To decrease brightness, press
one or more times.
3. When the desired brightness is
achieved, press HOME twice to exit
programming and return to the last-
selected device menu screen.
NOTE: Otherwise, to program other features,
press HOME only once to return to the
Program Keys.
OFA Kameleon wRF UG rev 3.fm Page 13 Monday, September 13, 2004 11:18 AM