Filter
Top Products
USER’S GUIDE
Using Macros 29
4. If desired, repeat steps 2 through 3 (of this section) for each device that
you want volume to be unlocked.
5. To exit programming, press HOME once.The display returns to the last-
selected device menu screen
.
6. Now, after you select a device that has volume unlocked, pressing
VOL
, VOL , or MUTE controls the device’s volume only in its own
mode.
UNLOCKING ALL VOLUME CONTROL (RESTORING DEFAULT SETTING)
2. Press VOL once.The Volume Lock programming screen appears:
USING MACROS
The OFA Kameleon 8-Device Remote with RF includes five Macro Keys, M1
through M4 and POWER. Each one can be set up to perform a repetitive, time-
consuming operation with the press of a single key.
NOTE: . A macro programmed onto the POWER key can only be accessed in the
HOME THEATER mode. Pressing it in any other mode only sends a “Power On/
Off” IR command to the selected device.
1. Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly:
3. Press VOL once.The two bottom IR
segments flash four times and the
Program Keys appear again.
4. To exit programming, press HOME
once.The display returns to the last-
selected device menu screen
.
5. Volume is again independently
controlled according to its default states
for all programmed devices.
OFA Kameleon wRF UG rev 3.fm Page 29 Monday, September 13, 2004 11:18 AM