USER’S GUIDE
Using Learning 33
• Do not use the following keys for learning: Device Keys, M1~M4, SETUP,
FAV, SCROLL, PRESET, PVR VOD, or Record (•) Key.
• Learning capacity is approximately 50 to 75 keys, depending on the code
being learned.
• If both learned and keymoved functions are assigned to the same key, the
last programmed function is stored.
• A learned function cannot be used as a source for Keymover (see Using
Keymover on page 36).
• Certain device codes are not learnable including multi-frequency types,
some high frequency ones, and other unusual formats.
• For optimum learning, avoid high levels of ambient light such as natural
sunlight or energy-efficient fluorescent lights.
NOTE: . Please have your original remote controls handy before programming
learning. Be sure to press each teaching key within 5 seconds of the previous entry.
Otherwise, the OFA Kameleon 8-Device Remote with RF exits programming mode.
PROGRAMMING A LEARNING KEY
2. Press IR LRN once.The IR Learn programming screen appears:
1. Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys appear as
SETUP flashes repeatedly.
3. Press a device key once (i.e., AUX, CBL/SAT,
CD, TV, DVD, AUDIO, VCR, or PVR) to assign
a mode for learning.The selected device
menu screen, including HOME, appears.
OFA Kameleon wRF UG rev 3.fm Page 33 Monday, September 13, 2004 11:18 AM