Filter
Top Products
10
REMOTE
CONTROL
OUT
OUT
VIDEO 11 – VIDEO – 2
ININOUT IN
IN OUT
(REC)
IN
(PLAY)
IN
IN
VIDEO 2
VIDEO
1
VIDEO
2
TAPE/MD
SUB
WOOFER
PRE OUT
CENTER
SPEAKER
SURROUND
SPEAKERS
S VIDEO
AUDIO
R
L
IN
TV/LINE
MON
OUT
MON
OUT
L
VIDEO
AUDIO
R
R
L
R
BA
L
FRONT SPEAKERS
AV CONNECTOR
FM 75
ANTENNA
DIGITAL OUTPUT
VIDEO 1
(OPT)(OPT) (COAX)
VIDEO 2
DIGITAL INPUT
AM
Connecting to a TV Using the
Audio/Video Connection Cable
If the TV is equipped with an S video input, make the
S video connection in addition to the normal video
connection. (The S video connection will provide
higher quality picture playback.) In this case, set
“Video Out Select” to “S Video” using the menu
explained in “Customizing the Function Settings”
starting from page 50 after completing the steps on
page 16. See page 53 for direct information.
If an RGB monitor is connected to the
DVD Receiver
Set “Video Out Select” to “RGB” using the menu
explained in “Customizing the Function Settings”
starting from page 50 after completing the steps on
page 16. See page 53 for direct information.
Connecting to a TV
Before connecting
• Refer also to the instruction manual of the TV.
• When you connect the DVD Receiver to the TV, be sure to turn off the
power and unplug both the units from the mains before making any
connections.
• Connect the DVD Receiver to the TV directly. If you connect the DVD
Receiver to a VCR, TV/VCR combination, or video selector, the
playback picture may be distorted as DVD videos are copy protected.
(White)
L (White)
R (Red)
To audio outputs
(Red)
(White)
TV
• Connect the plugs securely.
Incomplete
Insert completely
Connecting to a TV Using the SCART
Cable
Connect the DVD Receiver and your TV using the
supplied SCART cable.
If the TV is compatible with S video
signals
Set “Video Out Select” to “S Video” using the menu
explained in “Customizing the Function Settings”
starting from page 50 after completing the steps on
page 16. See page 53 for direct information.
If an RGB monitor is connected to the
DVD Receiver
Set “Video Out Select” to “RGB” using the menu
explained in “Customizing the Function Settings”
starting from page 50 after completing the steps on
page 16. See page 53 for direct information.
TV
: Signal flow
(Red)
SCART cable (supplied)
Connect the SCART cable directly to the TV.
No sound is reproduced if you connect it to a
VCR connected to the TV.
To SCART input
Stereo audio connection cable
Stereo audio connection cable
Video connection cable
L (White)
To audio outputs
R (Red)
(Yellow)
To video input
To S video input
DO NOT connect the
power cord (mains lead)
at this time.
S video connection cable
Both the S video and video connections are necessary,
otherwise the picture from equipment connected on the next
page may not be output to the TV.
(Yellow)