Filter
Top Products
1515
CENTER
SPEAKER
SURROUND
SPEAKERS
R
L
R
L
R
BA
L
FRONT SPEAKERS
OUT
OUT
VIDEO 11 – VIDEO – 2
ININOUT IN
IN OUT
(REC)
IN
(PLAY)
IN
IN
IN
VIDEO 2
VIDEO
1
VIDEO
2
TAPE/MD TV/LINE
MON
OUT
MON
OUT
SUB
WOOFER
PRE OUT
L
R
S VIDEO
VIDEO
AUDIO AUDIO
REMOTE
CONTROL
AV CONNECTOR
FM 75
ANTENNA
DIGITAL OUTPUT
VIDEO 1
(OPT)(OPT) (COAX)
VIDEO 2
DIGITAL INPUT
AM
Connecting an FM Outdoor Antenna (Aerial)
If the FM reception is not very clear with the supplied antenna (aerial), connect an FM outdoor antenna (aerial) instead of the indoor
FM antenna (aerial).
FM outdoor
antenna (aerial)
Notes
• Install the antenna (aerial) well away from tall buildings and in an area
where FM stations can directly be received.
• Keep the antenna (aerial) away from noise sources (neon signs, busy
roads, etc.).
• It is dangerous to put the antenna (aerial) close to power lines. Keep it
well away from power lines, transformers, etc.
• To avoid the risk of lightning and electrical shock, grounding is
necessary. Follow item 14 of the "Important Safeguards" on page 2
when you install the outdoor antenna (aerial).
Directional linkage
type splitter
To DVD Receiver To TV (or VCR)
FM 75
ANTENNA
AM
Directional Iinkage
Do not use the same antenna (aerial) for both FM and TV (or VCR) reception
since the FM and TV (or VCR) signals can interfere with each other. If you
must use a common FM/TV (or VCR) antenna (aerial), use a directional
linkage type splitter.
z Connection for the Onkyo Cassette Tape Deck
Onkyo cassette tape deck
Notes
• Connect the plugs securely.
• Be sure to connect to the z connectors using the z cable.
• The connections on page 11 are needed even if z connection is
made.
• Do not connect the DVD Receiver’s z connector to any component
other than an Onkyo product. It may cause malfunction.
Incomplete
Insert completely
DO NOT connect the
power cord (mains lead)
at this time.
The supplied remote controller has the following three extended functions in addition to operating the DVD Receiver:
• First, operating the TV (see page 29),
• Second, operating the Onkyo MD recorder (no z connection is needed) (see page 29), and
• Third, operating the z connected Onkyo cassette tape deck through the DVD Receiver (see page 29).
To use the third function, you need to make the z connection between the cassette tape deck and the DVD Receiver. The z
cable to make the z connection is supplied with the cassette tape deck.
If you start playing back the cassette tape deck after making the z connection, the DVD Receiver automatically changes its input
source to the cassette tape deck –– Direct Change function.
z cable