Filter
Top Products
63
Causes
• The power cord (mains lead) is
disconnected.
• The main power is set to OFF.
• There is external noise interfering with the
computer circuits of the DVD Receiver.
• The AC fuse is blown.
• The muting function is activated.
• The DVD Receiver is not properly
connected.
• The amplifier protection circuitry has
activated. (The STANDBY indicator
flashes.)
• Headphones are connected.
• The speakers are not properly connected.
• The listening mode is set to “Stereo” or
“Orchestra.”
• The volume level of the center speaker
(“Center”) is set to minimum.
• A speaker configuration without the center
speaker is selected.
• The TV is not set to receive the output
signals from the DVD Receiver.
• The video cable is not connected
securely.
• Only the S video connection is made.
• Another input source is selected.
• Power supply fluctuations or other
abnormalities such as static electricity
may interrupt correct operation.
• No disc is inserted.
• The region number of the disc is
unmatched to the DVD Receiver.
• An unplayable disc is inserted.
• The disc is placed upside down.
• The disc is not placed within the disc tray
guide.
• The disc is dirty.
• The parental lock function is activated.
• The SETUP button is pressed and the
DVD Receiver stands by for the next
function setting command.
• Copy protection is activated.
• The disc is dirty.
• It is in fast forward or fast reverse
playback.
• The DVD Receiver is in repeat playback
mode, memory playback mode, or
random playback mode, etc.
• The TV is not set to receive the output
signals from the DVD Receiver.
• A wrong sound signal conversion method
is selected.
Remedies
• Check the connection of the power cord
(mains lead).
• Turn on the main power.
• Switch off the main power, then switch it on
again. If not recovered, disconnect the power
cord (mains lead), then connect it again.
• Contact your nearest Onkyo service
center.
• Deactivate the muting function.
• Check the connections to the DVD
Receiver.
• Contact your nearest Onkyo service
center.
• Decrease the volume, then disconnect the
headphones.
• Check the speaker connections.
• No sound is reproduced from the center
speaker when the listening mode is
“Stereo” or “Orchestra.”
• Adjust the volume level of the center
speaker.
• Check that the selected speaker
configuration includes the center speaker.
• Set the TV to the DVD Receiver’s input.
• Check the connections between the DVD
Receiver and TV set.
• Also make video connection.
• Select the appropriate input source.
• Switch off the main power, then switch it on
again. If not recovered, disconnect the power
cord (mains lead), then connect it again.
• Insert a disc. (Check that “DVD,” “VCD,” or
“CD” is lit in the DVD Receiver’s display.)
• See the rear panel of the unit to check the
playable region number.
• Check the playable discs.
• Place the disc with the playback side
down.
• Place the disc within the proper guide on
the disc tray.
• Eject the disc and clean it.
• Deactivate the parental lock function or
change the parental lock level.
• Press SETUP once. If the buttons still
don’t work, press r.
• Connect the DVD Receiver directly to the
TV. Avoid connecting the DVD Receiver to
the TV through a VCR.
• Eject the disc and clean it.
• Sometime a small amount of picture
distortion may appear. This is not a
malfunction.
• Resume normal playback.
• Set the TV to the DVD Receiver’s input.
• Check the current sound signal
conversion method, and select the right
one.
Symptoms
The DVD Receiver doesn’t
switch on.
No sound is reproduced.
No sound or very little
sound is reproduced from
the center speaker.
No picture appears on the
TV screen.
The sound of the playback
source is not heard.
The buttons on the remote
controller and DVD
Receiver do not operate.
The DVD Receiver does
not start playback.
The DVD related operation
buttons do not work.
Brightness is unstable or
noise is visible in the
playback picture.
The playback picture is
occasionally distorted.
Playback doesn’t follow the
course of the disc’s
programs.
The picture from the DVD
Receiver doesn’t appear
on the TV screen.
No sound is reproduced.
Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective
instruction manuals of the connected components and TV.
Pages
16
16
16
–
30
10–16
–
31
13
36
19, 37
17
–
10
10, 11
28
16
20
4
9
20
20
21, 9
56
50, 21
10
21, 9
22
39, 40, 41
–
46, 54
Amplifier
DVD (VIDEO CD/Audio CD)
Troubleshooting
Other