Filter
Top Products
59
Recording Using the Connected Equipment
MD recorder/DAT/CD recorder Cassette tape deck
TV
Equipment connected to TAPE/MD
Equipment connected to VIDEO 1Equipment connected to VIDEO 2
DIGITAL
OUTPUT
(OPT)
VIDEO 1 DIGITAL
INPUT (OPT)
Digital Sound
Analog
Sound
Picture &
Analog Sound
Picture &
Analog Sound
Digital Sound
Picture &
Analog Sound
Analog
Sound
Picture &
Analog Sound
Digital Sound
Picture
Analog Sound
LD player/
Set Top Box
Video cassette player
DVD recorder
VCR
You can record according to the following using the connected
recording equipment:
• Sound/picture of discs played back by the DVD Receiver,
• Sound of FM/AM programs, and
• Sound/picture of the connected source.
DVD Receiver
DVD video / VIDEO CD / Audio CD /
FM programs/ AM programs
Note
Many discs and sources are copy protected. Copy protected sources
are impossible to record.
Simplified diagram of the connected equipment (See also pages 10 and 11 for the actual connections.)
Basic Recording Procedure
Set the recording equipment (MD recorder, DAT, Cassette tape
deck, VCR, DVD recorder, CD recorder, etc.) to recording pause.
Select the input source to be recorded, then set it to play pause.
• To play and pause a DVD video, VIDEO CD, or audio CD, see page 21.
• To select an FM/AM program, see page 26.
• To select a connected source, see page 28.
Refer to the manuals of the connected source equipment for instructions on
how to play and pause.
Release the recording pause set in step 1 to start recording.
Start playback of the selected source in step 2.
2
1
3
4
Notes
• If you select another input source
during recording, the selected
source will be recorded.
• Sound effects described on pages
32 to 38 do not affect the recorded
sounds whereas the sound set in
the AUDIO setting menu (see
pages 50 and 54) will be recorded.
VIDEO 2 DIGITAL
INPUT (COAX)
Additional Operation