21
EN
OTHER SETTINGS
TV/DTV SECTION
When scanning both TV and DTV at the same time
* You can access this menu from both modes
(analog / digital).
1 Select TV/VCR mode by pressing [SELECT].
2 Press [SET-UP].
Use [K / L] to select "CHANNEL SET UP", then
press
[ENTER].
3 Use [
K
/
L
] to select "AUTO
PRESET CH(TV/DTV)",
then press
[ENTER].
• Scanning and memorizing
the channels automatically
starts.
• When the scanning and memorizing are com-
pleted, the smallest memorized channel in the
analog broadcasting will be displayed. If no
analog channel is memorized, the smallest
memorized channel in the digital broadcasting
will be displayed.
NOTES:
• If you press [POWER] or [SET-UP] while setting AUTO
PRESET CH, AUTO PRESET CH setting will be canceled.
• If there is no TV signal input, "NO TV SIGNALS" will appear
on the display after the completion of channel scanning.
CHANNEL ADD/DELETE
The CHANNEL ADD/DELETE function lets you add
the channel that was not added by the AUTO PRE-
SET CH function due to the bad reception status at
the initial setting.You can also delete the unneces-
sary channels.
1
Select analog mode by pressing [SELECT].
2 Press [SET-UP].
Use
[
K
/
L
] to select "CHANNEL SET UP", then
press
[ENTER].
3
Use [
K
/
L
] to select
"ADD / DELETE CH",
then press
[ENTER].
4
Select the channel you
want to add or delete.
Use
[CH.
K
/
L
] or the
Number buttons
to select
your desired channel number.
(You can also use
[
K
/
L
] to
enter it.)
5 Press [ENTER] repeatedly to select "ADD" or
"DELETE".
6 Press [SET-UP] to exit the menu.
NOTE:
• Color of channel number displayed at the right top of
the screen;
-Blue/Green:The selected channel will be added.
-Pink/Red:The selected channel will be deleted.
