Sylvania 6727DG TV DVD Combo User Manual


 
29
ENENEN
VCR SECTION
RECORDING
TO CORRECT A PROGRAM AFTERWARD
1 Press [POWER] to turn on the unit.
2 Repeat steps 1 to 2 of "AUTOMATIC TIMER
RECORDING" on page 28.
3 Press [
BB
] (or press [
ss
] to go back one step)
until the part you want to correct begins flashing,
then use
[
KK
/
LL
] to make the changes.
Press
[ENTER] to confirm.
4 Press [POWER] to set automatic timer recording.
TO CANCEL A PROGRAM
1 Press [POWER] to turn on the unit.
2 If recording is in progress, press
[STOP/EJECT C A] on the unit.
3 Press [SET-UP].
Use
[
KK
/
LL
] to select "TIMER PROGRAMMING",
then press
[ENTER].
4 Use [
KK
/
LL
] to select a program you want to
cancel and press
[CLEAR].
5 Press [SET-UP] to exit the menu.
TIMER PROGRAM EXTENSION
You can shift the time schedule of an automatic timer
recording after programming or during recording.
1 Press [POWER] to turn on the unit.
2 Press [SET-UP].
Use
[
KK
/
LL
] to select "TIMER PROGRAMMING",
then press
[ENTER].
3 Press [REC] and use
[
KK
/
LL
] to select the desired
program.
4 Press [REC] repeatedly until your desired
begin/end time appears.
Each press will shift forward the begin/end time
for recording by 10 minutes.
5 Press [ENTER] to complete the setting. Then
press
[SET-UP] to exit the menu.
NOTES:
• When the recording is already in progress, each press will
shift forward the end time only.
• If you want to cancel while setting, press
[PAUSE
FF
] on the
remote control.The recording time returns to the original
time.
• When you shift forward the time schedule during recording,
the recording speed will be automatically set to the SLP
mode.
ABOUT OVERLAP OF PROGRAMS
When programs overlap, a program may not be
recorded.
The program with an earlier start has priority.
Once the earliest program finishes, the overlapping pro-
grams will begin recording in sequence.
When the starting time is the same, the program set on
the highest position in the program list has priority.
The illustration below demonstrates the sequence of
recordings.
9:00AM 10:00AM 12:00PM
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
11:00AM
Recording Sequence
*Recording period is SHADED
– TIMER PROGRAMMING –
CH DATE
MON
- - -
- - -
- - -
---
7
-
-
-
-
/
/
/
/
/
03
--
--
--
--
BEGIN
7
-
-
-
-
:
:
:
:
:
30- -
- -
- -
- -
--
END
8
-
-
-
-
:
:
:
:
:
50- -
- -
- -
- -
--
B
61
- - - - - -
- - - - - -
- - - - - -
------
PM
- -
- -
- -
--
PM
- -
- -
- -
--
SP
- -
- -
- -
--