Filter
Top Products
Basic Operations
Turning on/off & Signal source selection
11
Turning on
Press the main POWER SWITCH, the red power indicator lights
up, the set is in standby mode.
Press the POWER button on the remote controller to turn on the
set, and the power indicator turns to yellow. Or you can directly
press Channel up/down button on the set to turn on the set.
To turn off the set completely, press the main POWER SWITCH.
To turn off the set temporarily, press the POWER button on the
remote controller, the set is in standby mode, the indicator turns
to red.
If Power Restore item in OPTION sub-menu is set to ON, next
when you press Power Switch to turn on, the TV will directly be
in Power On mode.
Even if you set Power Restore to OFF while you quickly switch
off/on the TV the TV will also be in Power ON mode directly.
Press the AV/TV button to display signal
source selection menu.
Press the CH or CH button to select one
of RF/AV1(SAV1)/AV1(SAV2)/AV3(SAV3)
/YCbCr/XGA/YPbPr.
Press VOL or VOL button to confirm your choice.
If you select XGA or YPbPr as signal source, later on you can
directly press HD/TV button to switch between the previous
viewing mode (RF or VIDEO mode) and HDTV mode.
When the remote operation is received by the set, the TIMER
indicator (green) on the set's front will glitter to inform the user.
The buttons in this manual refer to the ones on the remote
controller if without special indication.
2
1
3
Note:
Note:
Turning off
Signal source selection
2
1
2
1
RF
AV1
AV2
AV3
YCbCr
YPbPr