Filter
Top Products
19
Basic Operation
To add channel:
Select channel with NUMBER keys
and press ADD/DLT.
To delete channel:
Select channel with CH / or
NUMBER keys and press
ADD/DLT.
■■
■■
■ Time Zone Adjust
■■
■■
■ VCR’s Output
Channel
1) Press to select
“VCR’S OUTPUT
CH.,” and press SET.
2) Press SET.
3) Press ACTION.
After 3 seconds
• To Make Corrections,
repeat steps 1) ~ 3).
1) Press to select “SET
CLOCK,” and press SET.
*Important: If a remote control button does not work
when pressed, press the VCR button on the
remote and try the button again.
(Only when Auto Clock is set.)
3) Press ACTION.
• “TIME ZONE ADJUST”
returns to “0” if clock is set
manually.
VCR’s Output Channel