Filter
Top Products
57
For Information
These displays will alert you to a missed operation or provide further instructions.
Warning and Instruction Displays
OSD Caution Page
PLEASE SET CLOCK BY
PRESSING ACTION KEY
If you attempt to set or review a Timer Recording and
the Clock is not set...
PLEASE PREPARE
FOR TIMER REC
If the DECK is not in Stop mode, or cassette is not
inserted, or cassette has no record tab, or tape is at
its end 2 minutes before a Timer Recording is about
to begin...
24
24
25
THIS DISC MAY NOT BE PLAYED
IN YOUR REGION
CHECK CASSETTE
RECORD TAB
NO CASSETTE
VIDEO HEADS MAY
NEED CLEANING
PLEASE INSERT HEAD
CLEANING CASSETTE
OR REFER TO MANUAL
END : PLAY
PLEASE CHECK THE DISC,
AND FOR STAINS OR
SCRATCHES ON DISC
TO CANCEL TIMER REC
HOLD DOWN STOP KEY
FOR APPROX 3 SEC
6
20
21
25
4
6
THIS TYPE OF DISC CANNOT BE
PLAYED. PLEASE INSERT A
DIFFERENT DISC
3
6
CANNOT PLAY THIS FILE 49
If you press REC on the remote control or DECK,
and a cassette is inserted with no record tab...
If you press PLAY, FF, REW, or REC on the remote
control or DECK without a cassette inserted...
If you press STOP or POWER during a Timer
Recording...
(visible in VCR mode only)
If head cleaning becomes necessary while playing
back a tape...
If you press PLAY, and DECK reads data from
a stained or scratched disc in DVD mode.
Playback of a disc with different region number was
attempted. Only discs marked region “1”, “ALL”, or
those that include “1” are playable on this DECK.
An unusable disc is inserted in the unit, or the disc is
not installed with label side up.
This file format cannot be played.
(Appears during MP3/JPEG file playback)