Filter
Top Products
E-23
Menu operation
Operations using the LCD panel
The menu can be adjusted using the Rotary
Encoders (1 to 3) after displaying the menu on
the LCD panel.
1 Press one of the following buttons: BLACK/
SHAD button, FLARE/MATRIX button,
GAMMA/DTL button, WHITE/SKINDTL
button, or KNEE/FUNC button to select an
item on the menu.
2 The indication will switch to the item under
the panel # the item on the panel # the
state before entering the menu mode # the
item under the panel step by step every time
the button is pressed.
The LED indicating the selected item is on
and the first layer of the menu for the
selected item is displayed on the LCD panel.
3 Move the layer on the menu using the
4
button or
3
button. (Indications are not
looped.)
4 Adjust the value of the sub-items on the
menu using the rotary encoder. The
numerical values are increased by turning
the rotary encoder clockwise and reduced by
turning it counterclockwise.
Depending on the layers, 1 to 3 sub-items
are displayed on the LCD panel.
(In some layers, it is necessary to press the
rotary encoder3)
5 When the camera menu is open, the menu
displayed on the LCD panel of the unit is
closed, “CAMERA MENU OPEN” is
displayed.
Operation of the camera recorder
menu
With the unit, it is possible to set the menu of the
camera recorder by checking the monitor.
Use this feature to set any items that are not
included in the unit menu.
1 Connect the VIDEO OUT connector of the
unit to the monitor.
2 Press the MENU ON button for 3 seconds or
longer.
The menu of the camera recorder is
displayed on the monitor.
<Note>
When the lamp of the CHARA ON button is
off, the menu is not displayed on the monitor.
3 Operate the menu by operating the Rotary
Encoder 3 in the same way as the JOG dial
on the main unit of the camera recorder.
<Note>
Significant items such as frame frequency etc.,
cannot be changed from the unit. In this case,
these items can be changed from the camera
recorder.
For details such as menu items and setting
methods, refer to the operation manual of the
camera recorder.
Adjustment of functions on the unit
It is possible to adjust the sound heard when a
button on the unit is pressed and the brightness
of the LCD panel button by using the menu of the
unit. For details, refer to “SYSTEM” (page 31).
AJ-RC10G.book 23 ページ ２００６年７月２６日 水曜日 午前９時２５分