Filter
Top Products
– 34 –
Basic operations
∑ Correction of the cue point
When TC INPUT is set to the STANDARD mode
(1) Move the cursor to the place which is to be corrected.
(2) ENTER the new value with the number keys.
(3) Press the ENT key.
≥Cue points cannot be cleared.
When TC INPUT is set to the REVERSE mode
Partial corrections cannot be made for cue points.
Repeat the input starting from step (1) when TC INPUT on page 33 was set to the REVERSE
mode.
Cursor
CUE TIME
00 H 41 M 07 S 04 F
CUE TIME
00 H 44 M 07 S 04 F