Filter
Top Products
<Connector
area>
S1/VIDE0 OUT connector
This is the S-VIDEO output connector.
ANALOG COMPONENT VIDEO OUT connector
The analog component video signal is output from this connector.
ANALOG COMPOSITE VIDEO OUT connectors
The analog composite video signals are output from these connectors.
The video signal with signals superimposed on it can be output from the VIDEO OUT3
connector.
The superimpose function can be set ON or OFF on the setup menu No. 006 (SUPER).
REMOTE connector
The unit can be controlled from an external source by connecting an external controller.
ENCODER REMOTE connector
The external encoder/controller is hooked up to this connector when the video output
signal and other settings are to be adjusted from an external source.
RS-232C connector (option)
DIGITAL AUDIO IN/OUT connector (optional AJ-YA655P required.)
This I/O connector is for digital audio signals which comply with the AES/EBU standard.
SERIAL DIGITAL COMPONENT AUDIO/VIDEO IN/OUT connector
(optional AJ-YA750P interface board required)
This I/O connector is for digital component audio and video signals which
SMPTE 259M-C/272M standard.
comply with the
The optional AJ-YA655P is required for digital audio signal output on the AJ-YA750P
board.
–13–