Panasonic AJ-D650 VCR User Manual


 
Setup (default settings)
The unit’s major settings are performed. by making selections on menus.
The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3
connector in the unit’s connector area are hooked up.
Changing the settings
Press the MENU button.
The setup menu appears on the TV monitor and setup menu No. appears on the
counter display. (If the setup has already been performed, the screen showing the
changes made last will appear.)
Press the cursor buttons (
, and select the item to be set.
The cursor ( ) on the menu screen moves and the item No. on the display flashes.
• When the
button is pressed, the item No. is incremented for 001 002 003
004 and so on; when the
button is pressed, the item No. is decremented.
Press the cursor buttons ( , at the position where the change is to be made.
The menu screen and display setting No. now flashes.
When the
button is pressed, the setting No. is incremented; when the button is
pressed, it is decremented.
<Notes>
When the RESET button is
pressed to return to the
factory settings, the factory
settings are restored only for
the user file currently being
used and other user files are
not affected.
The changed SYSTEM
menu contents are stored in
the memory even if the
MENU button is pressed.
Repeat steps 2 and 3 to change other items.
Press the SET button.
The changes are now stored in the memory.
• To return the items to the settings established before the changes were made, press
the MENU button without pressing the SET button.
To return the setup settings to the factory (initial) settings, press the RESET button
while the menu is displayed.
The following message is displayed.
When the PLAY button is pressed, the factory
settings are restored.
–25–