Filter
Top Products
Error messages
Error No. Descriptions
VTR operation
The start/end processing operation is not completed even after
10 or more seconds
E-57
have elapsed.
Stop
The cylinder motor speed is abnormally low.
E-59
Stop
E-60
E-61
E-67
E-69
E-70
E-71
E-72
E-73
E-FF
The cylinder motor speed is abnormally high.
The capstan motor speed is abnormally low.
The tape-up reel motor speed is abnormally high.
An abnormal torque applied to the take-up reel motor is detected.
An abnormal torque applied to the supply reel motor is detected or if an abnormal
current flowing to the current-sensing resistor is detected.
An abnormal tension at the supply side is detected in the capstan mode.
An abnormal tension at the supply side is detected in the reel mode.
The reel motor at the take-up side is running in the reverse direction.
Tape start and end are detected simultaneously during loading or after loading is
completed.
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
Stop
–48–