Filter
Top Products
– 110 –
INSERT/ASSEMBLE AUTO EDIT menu
∑ Tape position indicator
This indicates the edit points (IN and OUT) and tape positions of the recorder and player.
≥EOT (end of tape) or BOT (beginning of tape) is displayed when
the tape is at its end or beginning.
≥During split editing, the audio and video edit points are indicated
separately.
∑ Duration
If the duration is known, it is sufficient to enter only the IN or OUT
edit points for the recorder and player: the remaining points will
be automatically calculated.
(Recorder’s time code readout value)
(Player’s time code readout value)
(Editing time)
∑ Entering the edit points
(1) Input the points directly using the number keys.
1) Press the center cursor key.
The cursor now appears.
2) Press the cursor key to move the cursor to the data input position (player’s IN point in
the figure).
3) Press the center cursor key.
The cursor now changes into a column cursor.
4) Input the edit point using the number keys.
5) Press the ENT key.
Follow the same steps to enter the IN and OUT points of the recorder and player.
≥Enter three edit points for the recorder and player.
(Refer to the section on duration.)
≥To clear the data: Move the cursor to the position where the data is to be cleared, and press
the center cursor key. The cursor now changes into a column cursor. The
entered point can be cleared by pressing the C key now.
Center cursor key
Cursor key
IN
P
:::
IN 0
P
:::
0 0 0 0 3 4 1 4