Filter
Top Products
– 23 –
VIDEO IN menu
Key
F1
F2
F3–F6
F7
F8–F11
F12
F13
Key designation
INPUT
For selecting the HD video
input signals.
INT SG
For selecting the type of
HD internal signals.
——
SG REF
For synchronizing the
INT SG
——
INT SG
For selecting the type of
SD internal signals.
INPUT
For selecting the SD video
input signals.
Description
DIGITAL: Selects the serial input signals.
INT SG: Selects the internal signals.
75% CB: Selects the 75% color bar signal.
100% CB: Selects the 100% color bar signal.
RAMP: Selects the RAMP signal.
MULT-BST: Selects the multi-burst signal.
BLACK: Selects the black-burst signal.
SIF PLL: Selects the signals for checking the serial interface
PLL.
SIF EQ: Selects the signal for checking the serial interface
equalizer.
SMPTE CB: Selects the SMPTE color bar signal.
ARIB CB: Selects the ARIB color bar signal.
AUTO: When video input signals are present, the internal
reference signal is locked to the input signals; when
video input signals are not present, it is locked to the
signal selected by the OUT REF setting°.
OUTPUT: The internal reference signal is locked to the
signal selected by the OUT REF setting°.
ONoteN
Bear in mind that the embedded audio signal in the SD SDI input
will be muted when OUTPUT is selected for this setting.
75% CB: Selects the 75% color bar signal.
100% CB: Selects the 100% color bar signal.
RAMP: Selects the RAMP signal.
MULT-BST: Selects the multi-burst signal.
BLACK: Selects the black-burst signal.
SIF PLL: Selects the signals for checking the serial interface
PLL.
SIF EQ: Selects the signal for checking the serial interface
equalizer.
SMPTE CB: Selects the SMPTE color bar signal.
DIGITAL: Selects the serial input signals.
INT SG: Selects the internal signals.
°Refer to the HOME SET UP menu.