Filter
Top Products
– 80 –
TC/CHR menu
Table of user bit settings
F1 (SOURCE)
INT (internal) TC
S LTC
S VITC
EXT LTC
EXT LTC
F2 (TC SLAVE)
——
——
SLAVE
DIRECT
F3 (UB SLAVE)
ON
OFF
ON
OFF
ON
OFF
F10 (TCR)
LTC
AUTO
VITC
LTC
AUTO
VITC
LTC
AUTO
VITC
LTC
AUTO
VITC
LTC
AUTO
VITC
LTC
AUDIO
VITC
LUBG mode
REGEN
INT UB
PRESET
INT UB
EXT REGEN
INT UB
PRESET
INT UB
DIRECT
VUBG mode
INT UB
REGEN
INT UB
PRESET
INT UB
EXT REGEN
INT UB
PRESET
INT UB
EXT REGEN
INT UB
PRESET°
°The user bit can be set in all modes except for recording.
DIRECT: The external LTC input signal is recorded directly and output.
It is not synchronized with the internal reference signal.
REGEN: The user bit is slave-locked to the value read out on the tape.
The user bit cannot be set.
EXT REGEN: The user bit is slave-locked to the externally input VITC or LTC.
The user bit cannot be set.
PRESET: The user bit is not locked to the value read out on the tape or external input.
The user bit can be set.
INT UB: In this mode, the previous user bit is retained, and neither the REGEN nor PRESET functions
can be implemented.
To set the user bit again, use the F1 (SOURCE), F2 (TC SLAVE) or F3 (UB SLAVE) key to
select one of the three modes above.