Filter
Top Products
36
Setup menus
The underlined items indicates the initial setting.
USER menu
<OPERATION>
No./Item Description
100
SEARCH ENA
This selects the direct search dial operation.
0000 DIAL
:
For direct search dial operations.
0001 KEY
:
Operation is not transferred to the search
mode unless the search button is pressed.
101
SHTL MAX
This sets the maximum speed for shuttle
operations.
0000 a8.4
: 8.4a normal speed
0001 a16
: 16a normal speed
0002 a32
: 32a normal speed
102
FF. REW MAX
This sets the maximum speed for FF and
REW operations.
0000 a32
: 32a normal speed
0001 a60
: 60a normal speed
0002 a100
: 100a normal speed
<Note>
With mini DV or mini DVCAM cassette, the
maximum speed is set to 32a regardless of this
item’s settings.
104
REF ALARM
This selects whether to warn the operator
when the REF. VIDEO signal has not been
connected.
0000 OFF
: Warning is not given.
0001 ON
: Warning is given by the flashing
STOP lamp.
<Note>
Video and audio output may be disturbed when
the reference video signal is not input, so it is
recommended that a system which inputs the
reference video signal be used.
105
AUTO EE SEL
This selects the VTR mode in which the EE
status is established when the MODE switch
is set to EE.
0000 S/F/R
: EE status is established in
STOP, FF, REW and EJECT modes.
0001 STOP
: EE status is established in STOP
and EJECT modes.
0002 BLACK
: EE status is established in STOP
and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes black and the sound is
muted when the tape is ejected.
0003 BLACK1
: EE status is established in
STOP, FF, REW and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes black and the sound is
muted when the tape is ejected.
0004 GRAY
: EE status is established in STOP
and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes gray and the sound is
muted when the tape is ejected.
0005 GRAY1
: EE status is established in
STOP, FF, REW and EJECT modes.
However, if the MODE switch is set to TAPE,
the picture becomes gray and the sound is
muted when the tape is ejected.
106
EE MODE SEL
This selects the EE mode output signals.
0000
NORMAL
:
Signals are output with a delay equivalent to
the length of internal signal processing.
0001 THRU
:
Signals are output directly, without internal
processing, and so are output with no delay.
<Note>
When the unit is in edit mode and SDTI/1394 or
SG has been selected for the input signals by the
INPUT SELECT button, internal operations are
forcibly set to NORMAL.
108
CAP. LOCK
This selects the CAPSTAN LOCK mode.
0000
2F
: 2F mode
0001 4F
: 4F mode
107
PLAY DELAY
This set the play delay time in frame
increments.
0000 0
::
0015 15
No./Item Description