Filter
Top Products
77
Specifications
[VIDEO]
$Video output connector
Analog component output:
BNCa3 (Y, PB, PR)
Y: 1.0 V [p-p], PB/PR: 0.486/0.7 V [p-p] switchable,
75Ω (75% color bar, 7.5% setup)
Analog composite output:
BNCa3, video 1, video 2 (video/WFM selectable), video 3
(superimpose on/off)
SDI output (option):
BNCa3, complies with SMPTE 259M-C standard
SDI 1, SDI 2, SDI 3 (superimpose on/off)
SDTI output (option):
BNCa2, complies with SMPTE 305M/321M standard
$Video signal adjustment
Video output gain:
±3 dB
Video output chroma gain:
±3 dB
Video output HUE:
±30°
Video output setup level:
±14 IRE
Video output sync phase:
±15 µsec
Video output SC phase:
±180°
[AUDIO]
$Audio input connector
Analog input (CH1, CH2):
XLRa2, 600Ω/high impedance selectable (factory setting: high
impedance), +4/0/–20 dBu selectable
Digital input (CH1/CH2):
BNCa1, AES/EBU format
SDI input (option):
BNCa2, active through, complies with SMPTE 259M-C/272M-
A standard
$Audio output connector
Analog output (CH1, CH2):
XLRa2, low impedance, +4/0/–20 dBu selectable
Digital output (CH1/CH2):
BNCa1, AES/EBU format,
75Ω, 1.0 ± 0.2 V [p-p]
SDI output (option):
BNCa3, 75Ω, complies with SMPTE 259M-C/272M-A standard
Monitor output:
XLRa2, low impedance, +4/0/–20 dBu selectable
Headphones:
Stereo mini jack, 8Ω, variable level
[Other Input/Output Connectors]
Time code input:
XLRa1, 0.5 V to 8.0 V [p-p], 10 kΩ
Time code output:
XLRa1, low impedance, 2.0 V ± 0.5 V [p-p]
RS-422A input:
D-sub 9-pin, RS-422A interface
RS-422A output:
D-sub 9-pin, RS-422A interface
RS-232C:
D-sub 25-pin, RS-232C interface
Parallel input/output:
D-sub 25-pin
Encoder remote:
D-sub 15-pin
[AUDIO]
$Digital audio
Sampling frequencies:
48 kHz (synchronous with video)
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz ±1.0 dB (at the reference level)
Dynamic range:
Better than 90 dB (1 kHz, emphasis OFF, “A” weighted)
Distortion:
Less than 0.05% (1 kHz, emphasis OFF, reference level)
Crosstalk:
Less than –80 dB (1 kHz, between 2 channels)
Wow & flutter:
Below measurable limit
Headroom:
20 dB
De-emphasis:
T1 = 50 µsec, T2 = 15 µsec (auto on/off)
$Cue track
Frequency response:
300 Hz to 6 kHz (–5.0 dB to +3.0 dB)
Weight and dimensions when shown are approxlmately.
Speclilcailons are subject to change without notice.