Filter
Top Products
38
Setup menus
The underlined items indicates the initial setting.
USER menu
<OPERATION>
No./Item Description
114
REC INH
LAMP
This selects whether to cause the REC INH
lamp to flash or light up when the cassette
has been set to the accidental erasure
prevention status.
0000 LIGHT
: The lamp lights up.
0001 FLASH
: The lamp flashes.
<Note>
When the REC INH switch is set to ON, the REC
INH lamp always lights regardless of the general
setting status.
115
EJECT SW
INH
This selects whether to enable or disable the
operation of the EJECT button on the front
panel.
0000
REC
: Operation is disabled while the
unit is in the recording mode.
0001 OFF
: Operation is enabled in all
modes.
116
EJECT LAMP
This selects whether the EJECT lamp is to
remain lighted or be turned off in the cassette
out status.
0000 MODE1
:
The EJECT lamp remains lighted.
0001 MODE2
:
The EJECT lamp goes off.
117
DIAL LAMP
This selects the conditions under which the
dial ring on the front panel is to light.
0000 OFF :
The dial ring does not light.
0001 MODE1 :
The dial ring lights during search
(JOG/SLOW/SHTL) mode.
0002 MODE2 :
The dial ring lights during JOG
mode.
0003 MODE3 :
The dial ring lights when a
cassette is inserted.