33
PF (Programmable Function) functions
1
Press (SHIFT + RECORDER).
The setup menu screen appears on the LCD
monitor, and the setup menu item number appears
on the counter display.
OThe setup menu screen is also displayed on the
TV monitor which has been connected to the
VIDEO OUT 3 connector or SDI OUT 3
connector.
MENU
4
Turn the search dial to move the cursor (2) to the
item to be registered.
5
Press the STOP button.
The display screen returns to the status in step 2,
and the registered item is displayed at the position
of the specified PF button.
7
After the item(s) has (have) been registered, press
the SET button.
The registered item(s) is (are) stored in the
memory, and the regular screen is restored.
6
To register the next item in the next PF button,
repeat steps 2 to 5.
Four most frequently used setup items can be
registered in the four PF buttons.
Registering setup items in the PF
buttons
2
Turn the search dial to move the cursor (2) on the
menu screen to the item (No.A04, A05, A06 or A07)
corresponding to the PF button to be specified.
Aligned the cursor with the No.A04 item, and set
the first menu item to be registered in .
In the same way, align the cursor with No.A05, A06
and A07, and three other menu items can be
registered in , and , respectively.
PF4PF3PF2
PF1
SETUP-MENU MENU
<USER1> NO.A04-
901 BL BRIGHT OFF
A00 LOAD USER2
A01 SAVE USER2
A02 P.ON LOAD OFF
2
A04 PF1 ASSIGN –––
A05 PF2 ASSIGN –––
A06 PF3 ASSIGN –––
A07 PF4 ASSIGN –––
END
3
When the STOP button is pressed, the menu items
which can be registered in the specified PF button
are displayed.
SETUP-MENU MENU
<USER1> NO.A04-
A04 PF1 ASSIGN –––
2
––– NO ASSIGN
001 LOCAL ENA
002 TAPE TIMER
003 REMAIN SEL
008 DISPLAY SEL
009 CHARA H-POS
010 CHARA V-POS
3
When the SET button is pressed, the regular
screen is restored.
OIf no operations are performed for a period of five
seconds while the menu items remain displayed,
the regular screen is restored.
1
Press (SHIFT + SET).
The menu items registered in the PF buttons are
displayed on the LCD monitor.
PF
PF1 SYS FORMAT 50M
PF2 INT SG CB75
PF3 –––––––––– ––––––
PF4 –––––––––– ––––––
2
Press the PF button ( , , or ) that
corresponds to the item whose setting is to be
changed.
Each time the PF button is pressed, the setting is
updated in sequence.
PF4PF3PF2PF1
