Filter
Top Products
36
Setup menus
(continued)
1
Press the (SHIFT+RECORDER).
MENU
2
Press the REW button or FF button while holding
down the SHIFT button to select the USER1 file.
4
Turn the search dial while holding down the search
button to select the user file whose contents are to
be loaded into USER1.
6
Press the PLAY button.
The settings of the user file selected in step 4 are
loaded, and the USER1 menu display appears. If
the STOP button is pressed instead, the settings
are not changed, and the USER1 menu display
appears.
7
Turn the search dial to move the cursor (2) on the
menu screen to a number other than No. A00
(LOAD) or No. A01 (SAVE).
8
Press the SET button. The USER1 settings are
stored in the memory.
If the USER1 settings are not to be stored in the
memory, do not press the SET button but press the
MENU button instead.
5
Press the SET button.
The following message appears on the menu
screen and counter display.
3
Turn the search dial to move the cursor (2) on the
menu screen to No. A00 (LOAD).
The contents of the USER2, USER3, USER4 or
USER5 file can be copied (loaded) into the USER1 file.
Also, the contents of the USER1 file can be copied
(saved) into the USER2, USER3, USER4 or USER5
file.
Loading user files
SETUP-MENU MENU
<USER1> NO.A00-0000
804 BLANK LINE BLANK
2
A00 LOAD USER2
A01 SAVE USER2
A02 P.ON LOAD OFF
END
SETUP-MENU LOAD
USER2
n
USER1 OK?
YES<PLAY>/NO<STOP>
USER 1 USER 2
USER 3
USER 4
USER 5
Load/save
Lock mode can
be set
Load/save
Lock mode can
be set
Load/save
Lock mode can
be set
Load/save
Lock mode can
be set
Menu screen
Counter display
The number of the user file selected in step 4 is
displayed at .