Filter
Top Products
68
Audio recording channel and monitor output selection
Audio recording channel
The audio recording channels are selected on the
AUDIO setup menu as shown below.
Recording
track
CH1
Recording signal
CH1 input/CH2 input/CH1 input+CH2 input
CH2 CH1 input/CH2 input/CH1 input+CH2 input
CH3 CH3 input/CH4 input/CH3 input+CH4 input
CH4 CH3 input/CH4 input/CH3 input+CH4 input
CUE
CH1 input/CH2 input/CH1 input+CH2 input/
CH3 input/CH4 input/CH3 input+CH4 input/
CH1 input+CH2 input+CH3 input+CH4 input
Monitor output channel
The monitor output channels are selected using the
AUDIO MON SEL (L and R) and AUDIO MON SEL
(MIX) buttons as shown below.
Monitor
output
L
Output signal
CH1/CH2/CH3/CH4/CH1+CH2/CH3+CH4/
CH1+CH3/CH2+CH4/CUE
R
CH1/CH2/CH3/CH4/CH1+CH2/CH3+CH4/
CH1+CH3/CH2+CH4/CUE
Printed circuit board
F1 board (AUDIO)
Switch No. Function
SW100 AUDIO INPUT IMPEDANCE SW
This sets the CH1 audio input impedance.
HIGH/600Ω
SW101 AUDIO INPUT IMPEDANCE SW
This sets the CH2 audio input impedance.
HIGH
/600Ω
SW200 AUDIO INPUT IMPEDANCE SW
This sets the CH3 audio input impedance.
HIGH/600Ω
SW201 AUDIO INPUT IMPEDANCE SW
This sets the CH4 audio input impedance.
HIGH/600Ω
The underlined items indicates the initial setting.
SW101
SW100
SW201
SW200