Filter
Top Products
54
Setup menus
(continued)
The underlined items indicates the initial setting.
USER menu
<VIDEO>
No./Item Description
660
UMID REC
This selects whether or not to record the
UMID information on the tape.
0000 OFF
:
UMID information is not recorded on the tape.
In addition, EE output signals are blanked.
0001 ON
:
UMID information is recorded on the tape.
<Notes>
OIf 1394 has been selected as the input signals
using the INPUT SELECT button, the UMID
information on the input signals will be
recorded regardless of this menu’s setting.
OIf THRU has been selected as the setup menu
item No. 106 (EE MODE SEL) setting, UMID
information of the EE output signals will be
blanked.
OThe UMID information cannot be rewritten by
this unit.
661
UMID GEN
This selects the basic UMID information to be
recorded on the tape when ON has been
selected as the setup menu item No. 660
(UMID REC) setting.
0000 INT
:
Newly created basic UMID information of this
unit is always recorded.
0001 EXT
:
The basic UMID information of the input
signals is recorded.
Newly created basic UMID information of this
unit is recorded if there is no basic UMID
information on the input signals.
<Notes>
OThe source pack (of the UMID information) of
the input signal will be recorded on the tape,
regardless of this menu’s setting.
OThe UMID information cannot be rewritten by
this unit.
662
UMID POS
This sets the line on which the UMID
information is to be superimposed.
[625i system] [525i system]
0000 BLANK 0000 BLANK
0001 8L 0001 12L
::::
0010 17L 0006 17L
::::
0015 22L 0008 19L
<Note>
The line selected for the setup menu item No.
501 (VITC POS-1) and No. 502 (VITC POS-2)
settings cannot be selected for this item.