Filter
Top Products
47
Setup menus
(continued)
The underlined items indicates the initial setting.
USER menu
<EDIT>
No./Item Description
320
VAR FWD MAX
This sets the maximum SLOW FWD speed.
0000 +4.1
:+4.1 (+3.1)a speed
0001 +1.85
:+1.85a speed
0002 +1
:+1a speed
<Notes>
OThe value for the DV/DVCAM tape is shown in
parenthesis ( ).
OAt any speed setting other than +4.1, the
phase cannot be synchronized from the
editing controller.
323
JOG FWD MAX
This sets the maximum JOG FWD speed.
0000 +4.1
:+4.1 (+3.1)a speed
0001 +1.85
:+1.85a speed
0002 +1
:+1a speed
<Notes>
OThe value for the DV/DVCAM tape is shown in
parenthesis ( ).
OThe maximum speed is set to +1a when the
dial on the front panel is operated.
OAt any speed setting other than +4.1, the
phase cannot be synchronized from an editing
controller which synchronizes the phase using
the JOG command.
321
VAR REV MAX
This sets the maximum SLOW REV speed.
0000 –4.1
:–4.1 (–3.1)a speed
0001 –1.85
:–1.85a speed
0002 –1
:–1a speed
0003 –0.43
:–0.43a speed
<Note>
The value for the DV/DVCAM tape is shown in
parenthesis ( ).
No./Item Description
309
EDIT RPLCEC
The same type of setting as setup menu No.
305. This selects the channel concerned
when the CUE edit preset is set in
compliance with the ON or OFF presetting for
the analog audio signals designated by the
controller.
0000 N-DEF
:
Not set.
0001 CH1
:
Compliance with analog CH1 edit preset.
0002 CH2
:
Compliance with analog CH2 edit preset.
0003 CH1+2
:
Compliance with either analog CH1 or CH2
edit preset.
310
CONFI EDIT
This selects whether to conduct
simultaneous playback while editing is in
progress.
0000 OFF
:No simultaneous playback
0001 ON
:Simultaneous playback
<Note>
Simultaneous playback is valid when the MODE
switch is set to TAPE.
311
AUD EDIT IN
This selects the connection method for the
digital audio edit IN point.
0000 CUT
:Cut processing
0001 FADE
:V Fade processing
312
AUD EDIT OUT
This selects the connection method for the
digital audio edit OUT point.
0000 CUT
:Cut processing
0001 FADE
:V Fade processing
313
AUTO ENTRY
This selects whether the IN point is to be
entered using the PREROLL button when it
has not been entered.
0000
DIS
:IN point is not entered.
0001 ENA
:IN point is entered.
314
CF ADJ SEL
This selects the CF adjustment deck with
deck-to-deck editing.
0000 PLAYER
:
The player’s edit IN/OUT points are adjusted.
(reference as the RECORDER side)
0001 RECORD
:
The recorder’s edit IN/OUT points are
adjusted. (reference as the PLAYER side)
315
AFTER
CUE-UP
This selects the mode after cue-up operation
is complete.
0000 STOP
:STOP mode
0001 STILL
:SHTL STILL mode
0002 STILL2
:SLOW STILL mode
308
EDIT RPLCE4
The same type of setting as setup menu No.
305. This selects the channel concerned
when the CH4 edit preset is set in
compliance with the ON or OFF presetting for
the analog audio signals designated by the
controller.
0000 N-DEF
:
Not set.
0001 CH1
:
Compliance with analog CH1 edit preset.
0002 CH2
:
Compliance with analog CH2 edit preset.
0003 CH1+2
:
Compliance with analog CH1 or CH2 edit
preset.