Filter
Top Products
31
Basic Operation
EXIT
Notes:
• Some channels with very weak signals may be locked into memory. If desired, these channels can be deleted man u al ly using
the Manual Program feature.
• Auto scan must be done when you select the input signal for the fi rst time or whenever you change the antenna confi guration.
Tuning channels
Press to select
Auto Scan item.
Press to start
Auto Scan.
Notes:
• If Cable Only, Antenna Only or Antenna/Cable is selected and DCM (Digital Cable Module) is not in, the Auto Scan will
perform Scan All.
• If Cable Only is selected and DCM is in, Auto scan will be skipped.
• If Cable/Antenna is selected and DCM is in, Antenna (B) Analog & Digital Auto scan will be performed.
Auto Scan - To automatically Scan All available channels, Antenna (A) Analog, Antenna (A) Analog & Digital,
Antenna (B) Analog and Antenna (B) Analog & Digital.
CH
CH
VOL VOL
OK
CH
CH
VOL VOL
OK
2
3
Program Channel
Input Setup
Auto Scan
Manual Program
Signal Meter
Scan All
Antenna (A) Analog
Antenna (A) Analog & Digital
Antenna (B) Analog
Antenna (B) Analog & Digital
SELECT OK
EXIT
MENU
to return
Press to start
Auto Scan.
CH
CH
VOL VOL
OK
5
1
Select Auto Scan and press OK to enter
the sub menu.
Press to exit menu.
4