Filter
Top Products
17
RQT9184
(ENG)
Enjoying High Bit rate Audio and Video of
BD-Video [BD-V]
This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in
BD-Video.
In order to enjoy these audio formats, connect this unit to your amplifier/receiver supporting HDMI Ver. 1.3 using a High Speed HDMI
cable (> 6) and set “Audio Priority Preset” (> 27) to “Quality”.
However, there are the following restrictions.
≥The clicking sound on the menu and audio with secondary video in picture-in-picture mode (> 16) cannot be output.
≥Any audio format not decoded by the connected amplifier/receiver cannot be output properly.
If you want to output the audio properly, set “Audio Priority Preset” to “Secondary” or “Custom”.
∫ Differences in audio output by setting
The output audio type can be changed depending on the menu settings.
Set “Digital Audio Output” (> 27) in accordance with your favorite audio with reference to the following table.
[Note]
Enjoying 7.1ch LPCM
Connect this unit to your amplifier/receiver using an HDMI cable, and select “Quality” or “Custom” and then set “BD-Video Secondary Audio” to
“Off”.
When the unit is connected using the DIGITAL AUDIO OUT terminal, there are restrictions for high bit rate audio.
≥When “Secondary” is selected, the audio is output in the formats enclosed in bold frames.
≥When“Quality” is selected, the audio is output in the formats shown in the shaded area.
Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in
60 frames/second in accordance with the display format.
These can be output in 24p as the original. Therefore, high-quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.
NECESSARY CONNECTIONS
≥Connect to a TV supporting 1080/24p input via an HDMI cable.
NECESSARY SETTINGS
≥“24p Output”: “On” (> 28)
Regarding High Bit rate Audio
Secondary
To enjoy secondary audio
Original audio Dolby Digital Plus Dolby TrueHD
DTS-HD High
Resolution Audio
DTS-HD Master
Audio
;;;;
Audio formats are
output as:
PCM
≥“BD-Video Secondary Audio” is set to “On”, and “Digital Audio Output” is fixed to “PCM”.
≥Data of 6 channels or more will be output in 5.1 channels.
Quality
To enjoy high bit rate audio
Select this mode if your amplifier/receiver is equipped with these decoders.
Original audio Dolby Digital Plus Dolby TrueHD
DTS-HD High
Resolution Audio
DTS-HD Master
Audio
;;;;
Audio formats are
output as:
Dolby Digital Plus Dolby TrueHD
DTS-HD High
Resolution Audio
DTS-HD Master
Audio
≥“Digital Audio Output” is set to “Bitstream”, and ‘“BD-Video Secondary Audio” is fixed to “Off”.
The clicking sound on the menu and audio with secondary video in picture-in-picture mode is not
outputted.
Custom
To set the high bit rate audio and secondary audio individually
“BD-Video Secondary Audio”: “On” “BD-Video Secondary Audio”: “Off”
PCM Bitstream PCM Bitstream
Maximum 5.1ch PCM Dolby Digital
Maximum 7.1ch original
PCM
The original format
Original audio PCM
Bitstream
“BD-Video Secondary Audio”:
“On”
“BD-Video Secondary Audio”:
“Off”
Dolby Digital Plus/Dolby TrueHD
(7.1ch)
Down-mixed 2ch PCM Dolby Digital
Dolby Digital
DTS-HD High Resolution Audio/
DTS-HD Master Audio (7.1ch)
Down-mixed 2ch PCM Dolby Digital
DTS Digital Surround
7.1ch LPCM Down-mixed 2ch PCM Down-mixed 2ch PCM Down-mixed 2ch PCM
Regarding 24p output
Playback
DMP-BD50PP-RQT9184_eng.book 17 ページ ２００８年４月４日 金曜日 午後８時１４分