Filter
Top Products
29
RQT9184
(ENG)
When connecting to an amplifier/receiver to enjoy multi-channel surround sound, use the following settings on this unit if they cannot be set on
the amplifier/receiver.
The settings are not effective when outputting bitstream signals.
Preparation
Set “Speaker” to “Multi Channel”. (> 28)
§
Surround back channel is enabled only when the unit is connected
to an amplifier/receiver supporting HDMI 7.1 channel audio.
[BD-V]: If the original audio is 5.1ch DTS-HD or DTS, the remapping
function is activated to divide it to 7.1ch.
Speaker presence and size (A)
1
Press [
3
, 4, 2, 1]
to select the speaker icon (
A
) and press
[OK]
.
2
Press [
3
, 4]
to select the setting and press
[OK]
.
Icon examples:
Surround speaker (LS)
≥Large: Select when
the speaker
supports
low-frequency (under 100 Hz) reproduction.
≥Small: Select when the speaker does not support
low-frequency reproduction.
In order to make an ideal listening environment, settings of speaker
sizes may be automatically adjusted.
For example, if the subwoofer is set to “No”, the front speakers will
automatically be set to “Large”. (In this case, we recommend
connecting a speaker that can reproduce bass below 100 Hz.)
Delay time (B)
For optimum listening with 7.1/5.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position.
If you have to place the center, surround and surround back
speakers closer to the seating position, adjust the delay time to
make up for the difference.
If either distance D or F is less than E, find the difference in the
relevant table and change to the recommended setting.
1 Press [3, 4, 2, 1] to select the delay time box (B) and press
[OK].
2 Press [3, 4] to select the setting and press [OK].
Channel balance (C)
This does not work when connected with the HDMI terminal and
“HDMI Audio Output” (> 28) is set to “On”.
1 Select “Test” and press [OK].
A test signal is output.
Front (L)_—)Center_—)Front (R)_—)Surround (RS)
:;
Surround (LS)(— Surround Back (LB)
§
(— Surround Back (RB)
§
§
Test signal is output only when the unit is connected using HDMI
AV OUT terminal.
2 While listening to the test signal, press [3, 4] to adjust the
volume of each speaker
Front speakers: 0.0 to s6.0 dB
Center and surround speakers: 0.0 to s12.0 dB
≥You cannot adjust the volume of surround back speakers.
3 Press [OK].
The test signal stops.
≥No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
4 Press [OK].
“Others”
Off Timer
Select how long the unit remains on when it is not being
used.
≥2 Hours ≥6 Hours ≥Off
Remote Control Code (> 33) ≥Set Code 1
≥Set Code 2 ≥Set Code 3
Easy Setting
You can execute basic settings (On-screen Language, TV
Aspect).
≥Yes ≥No
Restore Default Settings
This returns all values in the Setup menu and the on-screen
menu, except for “Remote Control Code”, “On-screen
Language”, “IP Address/DNS Settings”, “Proxy Server
Settings”, “DVD-Video Ratings” and “BD-Video Ratings” to
the default settings.
≥Yes ≥No
DivX Registration (> 20)
You need this registration code to purchase and play DivX Video-on-Demand (VOD) content.
Firmware Update (> 9)
≥Press [OK] to show the following settings.
Automatic Update
When this equipment remains connected to the Internet,
it will check for the latest firmware version when it is
turned on and you can update it if necessary.
≥On
≥Off
Update Now You can update the firmware manually.
Changing the speaker setting to suit your speakers
ms
ms
L
Complete
Test
LS
R
SW
RS
dB
dB
dB
dB
dBdB
ms
LB RB
0.0
0.00.0
0.0
0.0
0.0
0.0 0.00.0
C
Subwoofer
Front (R)
Center
Front (L)
Complete
(LS)
Surround
(RS)
Surround back
Test
(RB)
§
(LB)
LS
LS
NoLarge Small
D Center speaker F Surround/Surround back
speakers
Difference Setting
Approx. 34 cm (1 ft. 1 in.)
1.0 ms Difference Setting
Approx. 170 cm (5 ft. 6 in.)
5.0 ms
Approx. 68 cm (2 ft. 2 in.)
2.0 ms
Approx. 102 cm (3 ft. 4 in.)
3.0 ms
Approx. 340 cm (11ft. 1 in.)
10.0 ms
Approx. 136 cm (4 ft. 5 in.)
4.0 ms
Approx. 510 cm (16ft. 8 in.)
15.0 ms
Approx. 170 cm (5 ft. 6 in.)
5.0 ms
E
FD
L
LS
R
SW
C
RS
C
RS
LS
D
E
F
L
LB
R
RS
SW
C
RB
C
RB
RSLS
LB
D
E
F
F
LS
Approximate room dimensions
Circle of constant primary listening distance
: Actual
speaker
position
: Ideal
speaker
position
: Primary
listening
distance
5.1ch speaker
connection
7.1ch speaker connection
Settings
DMP-BD50PP-RQT9184_eng.book 29 ページ ２００８年４月４日 金曜日 午後８時１４分