Filter
Top Products
68
RQT8859
Changing the unit’s settings
(continued)
Refer to the control reference on page 64.
Tabs Menus Options (Underlined items are the factory presets.)
Others
Remote Control (➡ 22) ≥DVD 1 ≥DVD 2 ≥DVD 3
Clock (➡ 73)
Power Save
≥Refer to the following when “Power Save” is set to “On”.
–“FL Display” is automatically set to “Automatic” (➡ 67).
–The “Quick Start” function does not work. (It is automatically
turned to “Off”.)
≥If “Quick Start” is set to “On”, “Power Save” is automatically
turned to “Off”.
≥On: Power consumption is minimized when the unit is turned to
standby (➡ 86).
≥Off
Quick Start
The Quick Start feature enables this unit to be ready to start
recording as quick as approx. 1 second
§
after turning it on. You
can start recording soon after deciding you want to record
something.
§
Only when recording to the HDD or DVD-RAM.
≥If this is set to “On”, “Power Save” is automatically turned to
“Off”.
≥Startup takes up to a minute when:
–You play a disc or start recording to discs other than
DVD-RAM.
–You want to make other operations.
–The clock has not been set.
≥On
≥Off: Standby power consumption is less than when this is set
to “On”.
DivX Registration ≥You need this registration code to purchase and play DivX
Video-on-Demand (VOD) content (➡ 39).
System Update
In order to update this unit’s software, the EPG download, and to
support system changes made by broadcasts, this unit
periodically performs software updates.
≥Press [OK] to show the following settings.
≥Update data and EPG download information is sent by an
unscheduled digital broadcast. In order to receive these
updates, you must be able to receive digital broadcasts.
≥An update will take approximately 60 minutes. While the update
is in progress, “SW-DL” appears on the unit’s display. You
cannot operate the unit until the update is complete. Removing
the AC mains lead while the update is in progress may damage
the unit.
≥An EPG download will take approximately 60 minutes. While
the EPG download is in progress, “GUIDE” appears on the
unit’s display. The EPG download can be interrupted by
switching on the unit, since the download will continue in the
background.
EPG Download in Standby ≥On
: When you set this unit to standby mode, EPG data is
downloaded automatically.
≥Off
Software Update in Standby ≥On
: When you set this unit to standby mode, software updates
are downloaded automatically.
≥Off
EPG/Software search period
Selects the time to automatically perform EPG download and
updates when the unit is set to standby mode. This can only
be set when “EPG Download in Standby” and “Software
Update in Standby” is set to “On”.
≥If there is a programmed recording set for the time you have
selected, the programmed recording will be given priority.
≥Automatic
: The unit will give priority to searching for EPG
download and update data at midnight.
≥02:00–06:00
≥06:00–10:00
≥10:00–14:00
≥14:00–18:00
≥18:00–22:00
≥22:00–02:00
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not
turn your unit off during the update. This could result in the
loss of data. A message shows that the update has finished.
If a new software version is not going to be broadcast for the
next few days, a corresponding message also appears.
≥If applicable update data is found, press [2, 1] to select “Yes”
and press [OK].
Initialize
≥Press [OK] to show the following settings.
Shipping Condition
All the settings except for the ratings level, ratings password
and clock settings return to the factory preset. The timer
recording programmes are also cancelled.
≥Ye s
≥No
Default Settings
All the settings other than the tuning settings, clock settings,
time zone settings, disc language settings, ratings level,
ratings password, remote control code, return to the factory
presets.
≥Ye s
≥No
EX77_87GN.book Page 68 Wednesday, May 30, 2007 1:10 PM