Filter
Top Products
26
RQT8388
Timer recording
See also “Important notes for recording” (➡ 8).
Depending on the type of disc used for recording or the type of
broadcast, there may be restrictions on the title you are trying to
record.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
≥You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
Preparation
≥Turn on the television and select the appropriate video input to suit
the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
(➡ 22).
≥Make sure that the clock settings are correct (➡ 67).
Entering G-
CODE numbers is an easy way of timer recording. You can
find these numbers in TV listings in newspapers and magazines.
[Note]
≥The G-
CODE system is not supported for digital broadcasts.
1 Press [G-Code].
2 Press the numbered buttons to enter
the G-CODE number.
Press [2] to move back to correct a digit.
3 Press [ENTER].
≥Confirm the programme and make corrections if necessary
using [3, 4, 2, 1] (➡ 27, step 3).
≥When “-- ---” appears in the “Name” column, you cannot set
timer recording. Press [3, 4] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit’s memory.
4 Press [ENTER].
The settings are stored and the timer programme is on.
Timer icon is displayed in left column.
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 1–4 to programme other recordings.
∫ To cancel recording when recording has already
begun (➡ 28)
∫ To release the unit from recording standby
(➡ 28)
∫ Notes on timer recording (➡ 28)
G-CODE is a registered trademark of
Gemstar Development Corporation. The
G-
CODE system is manufactured under
license from Gemstar Development
Corporation.
AUDIO
AUDIO
REC MODE
REC MODE
REC
REC
CREATE
CREATE
CHAPTER
CHAPTER
ENTER
ENTER
F
U
N
C
T
I
O
N
S
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
P
R
O
G
/
C
H
E
C
K
RETURN
RETURN
SUB MENU
SUB MENU
S
PLAY/x1.3
PAUSE
PAUSE
STOP
STOP
SLOW/SEARCH
SLOW/SEARCH
SKIP
SKIP
G-Code
G-Code
CH
CH
0
9
8
7
6
54
3
2
1
VOLUME
VOLUME
CH
CH
AV
AV
Í
TV
TV
DRIVE
DRIVE
SELECT
SELECT
Í
DVD
TIME SLIP
TIME SLIP
DISPLAY
DISPLAY
MANUAL SKIP
MANUAL SKIP
ANALOGUE
ANALOGUE
PAG E
PAGE
SELECT
INPUT
DELETE
DELETE
CH
CH
PROG/CHECK
G-Code
3,4,2,1
ENTER
DRIVE
SELECT
REC MODE
Numbered
buttons
“Blue”
Using G-CODE system to make timer
recordings
G-Code
Record
1:58 SP
DVD
30:24 SP
HDDRemain
12:53:00 15. 7. TUE
Input G-Code Number 0-9, and press ENTER.
G-Code
Record
1:58 SP
DVD
30:24 SP
HDDRemain
12:53:00 15. 7. TUE
Input G-Code Number 0-9, and press ENTER.
Timer
Recording
1:58 SP
DVD
30:24 SP
HDDRemain
12:54:00 15. 7. TUE
Mode
StopStartName Date
HDD
DVD
20:0019:0015. 7. TUE SPHDD
1 ARD
Programme Name
All Services : ARD
Timer
Recording
Remain
No.
DateName
ARD
15. 7. TUE
01
New
T
F
Timer icon
Timer
Recording
1:58 SP
DVD
30:24 SP
HDDRemain
12:56:00 15. 7. TUE
Mode
StopStart
No.
Date
HDD
DVD
HDD
Name
Drive
space
SP
OK
22:30
22:00
ARD
15. 7. TUE
01
New Timer Programme
F
Check to make sure “OK”
is displayed (➡ 29).
EH65.book Page 26 Friday, September 1, 2006 9:46 AM