Filter
Top Products
15
RQT9088
Watching analogue and digital broadcasts
1 Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2 Press [ DVD] to turn the unit on.
3 Press [WXCH] to select the channel.
Everytime you change the station, digital channel information
appears automatically (terrestrial digital channels only).
Channels are displayed in the order of digital channels first,
and then followed by analogue channels.
≥Digital channel
You can also select the channel with the numbered buttons.
≥Analogue channel
You can also select the channel with the following steps.
[Note] (Digital broadcast only)
≥This unit can receive Standard Definition (SD) broadcasts, but is
unable to receive High Definition (HD) broadcasts.
When High Definition (HD) programmes are broadcast, “Unable to
decode HD” is displayed in the digital channel information
(➡ right).
≥This unit can receive free cable television but it cannot receive paid
services.
While stopped
Press [STATUS ] to show the information
screen.
To switch information of the current programme and the next
programme
Press [2, 1].
To show detailed information about the programme
Press [STATUS ]
again (only when “info ” is displayed).
To hide the information screen
Press [STATUS ] once or twice.
Signal Quality
[Note]
You can also select the other channel when the information screen is
displayed by pressing [3, 4] and [OK].
∫ If a software update is available, a notification is
displayed on the digital channel information
Press the “Red” button to launch software update screen.
∫ If New service message appears
When a new DVB channel is added, this unit will be informed
automatically. Then the confirmation message appears. If you
select “Yes” on the display, Auto-Setup starts (all channel settings
and all created groups are deleted. The timer recording
programmes are also cancelled.)
.
The display/hide setting can be changed (➡ 63, New Service
Message).
Select the channel
e.g., 5: [0] ➡ [0] ➡ [5]
15: [0] ➡ [1] ➡ [5]
115: [1] ➡ [1] ➡ [5]
1 Press [ANALOGUE CH].
2 Press the numbered buttons to select the channel.
e.g., 5: [0] ➡ [5]
15: [1] ➡ [5]
STATUS
REC MODE
REC
MANUAL SKIP
CREATE
CHAPTER
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
G
U
I
D
E
RETURN
PLAY/x1.3
PAUSE
STOP
SLOW/SEARCH
SKIP
CH
PAG E
SELECT
INPUT
0
9
8
7
6
54
3
2
1
CH
AV
TV
DRIVE
SELECT
DVD
VOL
DELETE
EXIT
OK
OPTION
ANALOGUE
CH
G-Code
AUDIO
DISPLAY
TIME SLIP
PROG/CHECK
ANALOGUE
CH
3,4,2,1
OK
STATUS
2
3
OPEN
/
CLOSE
REC
2
3
Numbered
buttons
RECREC
RECREC
Digital channel information
No Signal: The digital broadcast signal is not being received.
No Service: No broadcasts are currently available.
If “No Signal” is displayed:
≥Adjust the position and direction of the aerial.
≥Check that the current digital broadcast channel is correctly
broadcasting.
352 ABC2
No Signal
All Services
18:53
Change Favourite
info
ABC News
19:00 - 19:30
NOW
Multi Audio
Encrypted
PG
Current time
During scrambled broadcasting
(Cannot be viewed with this unit.)
Broadcast time
Programme is broadcast in multi-channel
sound (➡ 55, DVB Multi Audio)
Group
Channel
Programme name
Change the
group (➡ 59).
Signal Quality (➡ below)
Station Name
Progress of the current programme
The parental ratings level is displayed.
352 ABC2
No Signal
All Services
18:53
Change Favourite
Software update
ABC News
19:00 - 19:30
NOW
Multi Audio
Encrypted
PG
Software update
A new DVB Service has been found.
Start DVB Auto-Setup?
Selecting DVB Auto-Setup will delete
the current Favourite settings
and all Timer Programmes.
New Service
No Yes
OK
RETURN
Media handling (Disc/USB memory/SD card)/Watching analogue and digital broadcasts
DMREX78&88GN-RQT9088-L_eng.book 15 ページ ２００８年４月１日 火曜日 午後６時３８分