Filter
Top Products
25
RQT9088
1 While the unit is on
Press [DRIVE SELECT] to select the
recording drive and press [∫].
2 Press [2, 1] to select “Stop
Recording” and press [OK].
If you stop a timer recording, it will be cancelled. However, if
you have set a weekly or daily timer recording, the recording
will start from the next time the timer recording is set.
Even when the unit is turned off, you can display the timer recording
list by pressing [PROG/CHECK].
1 Press [PROG/CHECK].
2 Press [3, 4] to select the programme
and press the “Red” button.
≥The timer icon “F” (➡ right) disappears from the timer
recording list.
≥You cannot cancel timer recording standby mode as long as
even one timer icon “F” (➡ right) remains in the timer
recording list.
≥Press the “Red” button again to activate timer recording
standby.
≥Timer recordings are activated regardless of whether the unit is
turned on/off.
≥Timer recordings begin when the set time is reached even when
playing.
≥Timer recordings do not begin while editing or copying in normal
speed mode (➡ 45).
≥If the unit is turned on when timer recording begins, it remains
turned on after recording finishes. It does not turn off automatically.
You can turn the unit off during timer recording.
≥If the unit is not put in the timer recording standby mode at the last
10 minutes before the programmed timer recording starting time,
the “F” flashes on the unit’s display.
≥When you programme successive timer recordings to start
immediately one after the other, the unit cannot record the part at
the beginning of the later programmes.
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
A Icons
B Message displayed in the “Drive space” line
C Channel name, programme name and other
information are displayed.
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (➡ 24,
right column, step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
You can also delete a programme with the following steps
1Press [3, 4] to select the programme and press [OPTION].
2Press [3, 4] to select “Delete” and press [OK].
∫ To exit the timer recording list
Press [PROG/CHECK].
[Note]
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
To cancel recording when recording
has already begun
To release the unit from recording
standby
Notes on timer recording
Stop Recording
Stop Recording
Cancel
Timer recording in progress.
Stop this timer recording?
It will be cancelled if you stop.
OK
RETURN
SELECT
Programme
Programme
Recorded Recorded
Not recorded
Check, change or delete a programme
F Timer recording standby is activated.
[ This programme is currently recording.
Programmes are overlapped. Recording of the
programme with the later start time starts when the
earlier programme finishes recording.
You stopped a weekly or daily timer recording. The icon
disappears the next time the timer programme starts
recording.
The disc was full so the programme failed to record.
The programme was copy-protected so it was not
recorded.
X The programme did not complete recording because
the disc is dirty or some other reason.
Timer programmes set to Auto Renewal Recording
(➡ 26).
Titles that have been rerouted to the HDD
(Displayed while recording.)
HDD Recording drive is set to HDD
DVD Recording drive is set to DVD
OK: Displayed if the recording can fit in the
remaining space.
> (Date): For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present
time) based on the time remaining on the disc.
! : It may not be possible to record because:
≥there is not enough space left.
≥the number of possible titles has reached its
maximum.
Relief: Timer programmes that will be relief recorded to
the HDD.
Timer
Recording
1:58 SP
DVD
30:24 SP
HDD Remain
RETURN
OK
Press OK to store new programme.
Mode
Stop Start
No.
Date
HDD
DVD
Name
Drive
space
New Timer Programme
TUE 14.10.08. 12:54:00
l
Advanced timer recording
DMREX78&88GN-RQT9088-L_eng.book 25 ページ ２００８年４月１日 火曜日 午後６時３８分