Filter
Top Products
9
RQT9088
STEP
2
Channel reception settings and TV aspect settings
1 Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2 Press [ DVD] to turn the unit on.
DVB Auto-Setup starts. The unit will search for the terrestrial
digital channels.
This takes about 5 minutes.
≥Terrestrial digital channels are stored into logical channels
numbers.
≥Analogue channels are preset at the time of shipping. If you
would like to add new TV channels, set them manually
(➡ 60).
DVB Auto-Setup is complete when Region Selection screen
appears.
The time information for your region can be obtained.
≥If the clock setting screen is displayed (➡ right).
3 Press [3, 4] to select your region
and press [OK].
Quick Start setting screen appears.
Quick Start (➡ 65)
If you select “On”,
–the unit starts recording in about 1 second
§
after you press
[¥ REC] while the unit is turned on.
–the unit displays the TV Guide screen in less than 1
second after you press [GUIDE] while the unit is turned off.
§
Only when recording to the HDD or DVD-RAM.
4 Press [3, 4] to select “On” or “Off”
and press [OK].
TV aspect setting screen appears.
5 Press [3, 4] to select the TV aspect
and press [OK].
≥16:9:
When connected to a 16:9 widescreen television
≥Pan & Scan:
When connected to a 4:3 aspect television,
side picture is trimmed for 16:9 picture
(➡ 84).
≥Letterbox:
When connected to a 4:3 aspect television.
16:9 picture is shown in the letterbox style
(➡ 84).
To stop partway
Press [RETURN].
In step 2, if the clock setting screen appears on the television, set
the clock manually.
This is a 24-hour clock.
1Press [2, 1] to select the item you want to change and press
[3, 4] to change the setting.
The items change as follows:
Hour!#Minute!#Second!#Day!#Month!#Year
^-----------------------------------------------------------------------------------------J
≥You can also use the numbered buttons for setting.
2 Press [OK] when you have finished the settings.
Quick Start setting screen appears.
(➡ Go to step 4)
STATUS
MANUAL SKIP
CREATE
CHAPTER
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
G
U
I
D
E
RETURN
PLAY/x1.3
PAUSE
STOP
SLOW/SEARCH
SKIP
CH
PAG E
SELECT
INPUT
0
9
8
7
6
54
3
2
1
CH
AV
TV
DRIVE
SELECT
DVD
VOL
DELETE
EXIT
OK
OPTION
ANALOGUE
CH
G-Code
AUDIO
DISPLAY
DVD
RETURN
3,4,2,1
OK
Numbered
buttons
DVB Auto-Setup
Please wait! Ch 6 69
Prog. QualityChannel Service Name Net ID TS ID
RETURN
RETURN: to cancel
ABC
ABC 2
352
354
1
2
12302
12289
12302
12289
9
9
Region Selection
OK
RETURN
SELECT
Queensland
NSW / ACT
Victoria
South Australia
Western Australia
Northern Territory
Tasmania
When clock setting screen is displayed
∫ To confirm that stations have been tuned
correctly (➡ 59)
∫ To restart set up (➡ 59)
TV Aspect
16:9
Pan & Scan
Letterbox
16:9 WIDE TV
4:3 TV
OK
RETURN
SELECT
Clock
Time Date
0
:
00 :
00
1
. 1
.
2008
Please set the clock.
OK: access RETURN: leave
0 9
Number
OK
RETURN
SELECT
CHANGE
STEP 1 Connection/STEP 2 Channel reception settings and TV aspect settings
DMREX78&88GN-RQT9088-L_eng.book 9 ページ ２００８年４月１日 火曜日 午後６時３８分