Filter
Top Products
65
RQT9088
(All factory default settings are indicated with underlined text.)
Others
Remote Control
Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic
products close together.
[DVD 1
] [DVD 2] [DVD 3]
Use “DVD 1”, the factory set code, under normal circumstances.
1 Press [3, 4] to select the code (“DVD 1”, “DVD 2” or
“DVD 3”) and press [OK].
To change the code on the remote control
2 While pressing [OK], press and hold the numbered button
([1], [2] or [3]) for more than 5 seconds.
3 Press [OK].
∫ When the following indicator appears on the
unit’s display
The unit’s remote control code
Change the code on the remote control to match the main unit’s
(➡ step 2).
[Note]
Executing “Shipping Condition” in the Setup menu returns the
main unit code to “DVD 1”. Change the remote control code to 1
(➡ step 2).
Clock
This unit usually obtains time and date information from digital
broadcasts and automatically corrects the time several times a
day. However, if the time is not set correctly use the settings listed
in the method below.
≥In the case of a power failure, the clock setting remains in
memory for approximately 60 minutes.
1
Press [
3, 4]
to select “Off” of “Automatic” and press [OK].
2 Press [2, 1] to select the item you want to change.
The items change as follows:
Hour!#Minute!#Second!#Day!#Month!#Ye a r
^-----------------------------------------------------------------------------------------J
Reset the clock regularly to maintain accuracy.
(Monthly accuracy +/– 15 seconds.)
3 Press [3, 4] to change the setting.
You can also use the numbered buttons for setting.
4 Press [OK] when you have finished the settings.
The clock starts.
[Note]
If a TV station transmits a time setting signal, and when
“Automatic” in the Clock setting menu is set to “On”, the automatic
time correction function checks the time and if necessary it is
adjusted several times every day.
∫ To change the region
1Press [3, 4] to set “Automatic” to “On” and press [OK] in step
1.
2Press [3, 4] to select the correct region and press [OK].
Auto clock setting starts. This takes a few minutes.
“Automatic clock setting completed.” screen is displayed.
3 Press [RETURN] to exit the screen.
Setup
Tuning
Remote Control
Press “n” and “OK” together
for more than 5 seconds on the remote
control.
Disc
Picture
Clock
Time
Automatic Region Selection
Date
15
:
45 :
39
11
.
12
.
2008
Off
Queensland
Please set the clock.
OK: access RETURN: leave
OK
RETURN
SELECT
CHANGE
e.g.,
This screen appears while
receiving a digital broadcast.
Power Save
[On] Power consumption is minimized when the unit is turned to
standby (➡ 83).
[Off
]
(If “Quick Start” is set to “On”, “Power Save” is automatically
turned to “Off”.)
≥Refer to the following when “Power Save” is set to “On”.
–“FL Display” is automatically set to “Automatic” (➡ 63).
–The “Quick Start” function does not work. (It is automatically
turned to “Off”.)
Quick Start
1 Sec. Quick Start for Recording & EPG Display
(When connecting to TV using 21-pin Scart, COMPONENT
VIDEO, VIDEO or S VIDEO terminals)
From the power on, recording on DVD-RAM and HDD starts in
about 1 second after the REC button is pressed. If the GUIDE
button is pressed while the unit is off, the Electronic Program
Guide (EPG) displays in less than 1 second. (Quick Start Mode)
[On
]
[Off] Standby power consumption is less than when this is set to
“On”.
(If this is set to “On”, “Power Save” is automatically turned to “Off”.)
≥Startup takes up to a minute when:
–You play a disc or start recording to discs other than DVD-RAM.
–You want to make other operations.
–The clock has not been set.
≥Depending on the type of TV or the connected terminal, it may
take time to display the screen.
DivX Registration
You need this registration code to purchase and play DivX Video-
on-Demand (VOD) content (➡ 31).
Changing the unit’s settings
DMREX78&88GN-RQT9088-L_eng.book 65 ページ ２００８年４月１日 火曜日 午後６時３８分