Filter
Top Products
Automatic editing
– 38 –
Executing automatic editing
1
Press the AUTO EDIT button.
Automatic editing is now performed.
• To stop the editing at any time, press the STOP button.
• When the edit OUT point is reached, the unit goes into the stop mode after postrolling.
Postroll
With assemble editing, editing continues for approx. 2 seconds even after the edit OUT point
has been passed, the tape is rewound to the OUT point, and the unit goes into the stop
mode.
With insert editing, the unit goes into the play mode after the edit OUT point has been
passed, the tape is rewound to the OUT point, and the unit goes into the stop mode.
Retry function
If the AUTO EDIT button is pressed again after the STOP button has been pressed to stop
the editing, editing will start again from the beginning.
Auto tag editing
If the AUTO EDIT button is pressed when the next edit point has not yet been entered upon
completion of editing, the previous edit OUT point will be entered as the IN point, and editing
is performed accordingly.
To release the auto tag mode, press one of the tape transport buttons (PLAY, etc.).
<Note>
The entered points are automatically cleared after editing is executed. However, the previous
editing points can be recalled by pressing the TRIM+ (or TRIM–) and SET buttons together.
1
ON
OFF
L
LEVEL CUE VIDEO
ASSEMBLE
DV
AUDIO ANALOG
VIDEO Y PB PR
AES/EBU
CMPST
INPUT SELECT
CH CONDITION
SCH CF
SHIFT ADJ START RESET
STAND BY
UB EXT EE
TC INT
TC MODE
TAPE
LOCAL
REV FWD
PULL
OPEN
JOG
PUSH
EJECT
AUTO OFF
SHTL
SLOW
CONTROL
REMOTE
EDIT
REW
PLAY
SERVO
STOP
PLAYER
REC
REC INHIBIT
FF
RECORDER
TC/CTL
TC SET
INSERT-
VIDEO CH1 CH2 CUE TC
AUTO EDIT
PREROLL
PREVIEW
REVIEW
REC
PB
PULL FOR VARIABLE
PULL
OPEN
HEADPHONES
CH1 CH2
R
MONITOR SELECT
W
TRIM
IN
SET
–+
OUT
A
OUT
A
IN
METER
FULL/FINE
POWER
USER SET SDI
SDI
SDTI(V&A)