Filter
Top Products
Setup menus
– 70 –
USER menu
<VIDEO> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
604 V-MUTE 0000 N-MUTE
SEL
0001 LOW RF
605 CC (F1) 0000 BLANK
BLANK
0001 THRU
606 CC (F2) 0000 BLANK
BLANK
0001 THRU
608 FREEZE 0000 FIELD
SEL 0001 FRAME
610 OUT C 0000 B/W
KILL
0001 COLOR
611 EDH 0000 OFF
0001 ON
613 VIN SETUP 0000 THRU
0001 CUT
614 VOUT 0000 THRU
SETUP 0001 ADD
616 CMPNT 0000 THRU
SETUP 0001 CUT
617 INTER- 0000 OFF
POLATE
0001 AUTO
The underline on the setting item denotes the initial setting.
This selects whether the video output signals are to be muted
when the blank portion of the tape is detected during play-
back.
0: No muting. (Freeze)
1: Muting. (Set to gray.)
This selects ON or OFF for the closed capture signal in the
first field.
0: Forced blanking performed.
1: Blanking not performed.
This selects ON or OFF for the closed capture signal in the
second field.
0: Forced blanking performed.
1: Blanking not performed.
This selects the freeze mode for still pictures.
0: Field freeze.
1: Frame freeze.
<Note>
When frame freeze has been selected, the frame slow status
is established with the slow setting.
This selects chroma color killer processing for the video output
signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
This selects whether to superimpose EDH onto the serial
output signals.
0: EDH is not superimposed.
1: EDH is superimposed.
<Note>
This item is valid when the optional serial interface board has
been installed.
This selects whether the composite signal is to be recorded
with setup or without setup.
0: When recording signals with no setup.
1: When recording signals with 7.5% setup.
<Note>
When recording composite signals, be sure to double-check
whether the signals are to be recorded with or without setup.
This selects the composite output signal.
0: The signal is output without setup.
1: The signal is output with 7.5% setup.
<Note>
When setting this menu item, bear the setup menu No. 616
(CMPNT SETUP) setting in mind.
When composite, component and serial (digital) signals are to
be output:
0: They are output in their original form.
1: They are output without the 7.5% setup signal.
Although vertical interpolation is performed automatically
during slow-motion playback and the vertical motion of the
playback picture is reduced, this menu item enables the
interpolation operation to be forcibly turned off.
0: The interpolation operation is forcibly turned off.
1: The interpolation operation is automatically turned on
during slow-motion playback.