Filter
Top Products
– 50 –
Setup (default settings)
The unit’s major settings are performed by making selections on menus.
The setting menus appear on the TV monitor when the TV monitor and VIDEO OUT 3
connector in the unit’s connector area are hooked up.
Changing the settings
1
Press the MENU button.
The setup menu appears on the TV monitor and setup menu No. appears on the
counter display. (If the setup has already been performed, the screen showing the
changes made last will appear.)
2
Rotate the search dial and select the item to be set.
The cursor ( ) on the menu screen moves and the item No. on the display flashes.
• When the dial is rotated clockwise, the item No. is incremented from 001→002→
003→004 and so on; when it is rotated counterclockwise, the item No. is
decremented.
• The search dial should be used in jog mode if at all possible.
• Hold down the PLAY button and press the FF (next major item) or REW (previous
major item) buttons to select the menu by major item.
3
While holding down the search button, rotate the search dial at the position where the
change is to be made.
The setting No. now flashes.
When the dial is rotated clockwise, the setting value is incremented; when it is rotated
counterclockwise, it is decremented.
4
Release the search button when the setting is completed.
The setting value on the menu screen and display flashes.
• During the SHTL mode, the item moves if the search dial is not at the STILL position.
5
Repeat steps 2 through 4 to change another item.
6
Press the SET button.
The changes are now stored in the memory.
• To return the items to the settings established before the changes were made, press
the MENU button.
To return the setup settings to the factory (default) settings, press the RESET button
while the menu is displayed. The following message will now appear:
SETUP-MENU INIT SET
YES<PLAY>/NO<STOP>
When the PLAY button is pressed, the factory settings
are restored.
<Note>
•
When the RESET button is
pressed to return to the
factory settings, the factory
settings are restored only
for the user file currently
being used and other user
files are not affected.
•
The changed SYSTEM
menu contents are recorded
even if the MENU button is
pressed.
REMOTE
PRESET PRESET PRESET PRESET
REGEN
PRESET FREE RUN
REC RUN
MANUAL MANUAL MANUALMANUAL
LOCAL
VIDEO
LEVEL
CHROMA
LEVEL
CF
TC
REC
INHIBIT
MENU SET DIAG
SYNCHRO-
NIZE
ENC
CONTROL
8F/4F
2F
ON
OFF
ON
OFF
ON
OFF
L
LEVEL CUE VIDEO
ASSEMBLE
DV
AUDIO ANALOG
VIDEO Y PB PR
AES/EBU
CMPST
INPUT SELECT
CH CONDITION
SCH CF
SHIFT ADJ START RESET
STAND BY
UB EXT EE
TC INT
TC MODE
TAPE
LOCAL
REV FWD
PULL
OPEN
JOG
PUSH
EJECT
AUTO OFF
SHTL
SLOW
CONTROL
REMOTE
EDIT
REW
PLAY
SERVO
STOP
PLAYER
REC
REC INHIBIT
FF
RECORDER
TC/CTL
TC SET
INSERT-
VIDEO CH1 CH2 CUE TC
AUTO EDIT
PREROLL
PREVIEW
REVIEW
REC
PB
PULL FOR VARIABLE
PULL
OPEN
HEADPHONES
CH1 CH2
R
MONITOR SELECT
W
TRIM
IN
SET
–+
OUT
A
OUT
A
IN
METER
FULL/FINE
POWER
USER SET SDI
SDI
SDTI(V&A)
SET UP HUE
261
34