Filter
Top Products
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Te quiero
Advanced Operations
19
RQT6025
Changing the monitor settings VCDDVD-VDVD-ARAM
Changing the size of
the picture
Press [MONITOR] on the main unit to
change the monitor settings.
The mode is shown on the LCD as follows.
NORMAL>FULL>ZOOM
^- OFF (no picture)(}
∫ The picture mode and size
The picture shown on the LCD depends on
the display mode and the size recorded on
the disc.
≥If you are not using the LCD on this unit,
select “OFF” (no picture) to conserve
power. (The [Í] indicator flashes.).
≥The LCD is turned off if you close the unit.
≥Horizontal lines may appear in the
picture when the mode is switched to
“ZOOM”, but this is not an indication of
malfunction.
Adjusting the brightness
1. Press [BRIGHT] on the main unit.
2. Move [3, 4] so “>” points to
“BRIGHT”.
3. Use [2, 1] to adjust the brightness.
j5: dark()5: light
4. Press [BRIGHT] to clear the display.
Power consumption increases with the level
of brightness.
Adjusting color intensity
1. Press [COLOUR] on the main unit.
2. Use [2, 1] to adjust the color shade.
j5: light()5: dark
3. Press [COLOUR] to clear the display.
Note
These changes are effective only for this
unit’s LCD. Make changes to the television’s
settings if you have connected one.
Mode
Software
Wide-
screen
4:3
4:3,
(Letterbox)
NORMAL
Full screen
Black bands on the
right and left.
Black frame.
FULL
Full screen
Stretched
horizontally.
Stretched
horizontally.
ZOOM
Top and bottom cut
off.
Top and bottom cut
off.
Full screen