Filter
Top Products
For Your Reference
28
RQT6025
Connecting other equipment
This unit has built-in Dolby Digital and DTS decoders (➡ page 44).
You can enjoy the powerful movie theater and hall-like sound available with Dolby Digital
and DTS by connecting an amplifier with 5.1-channel input terminals. You do not need to
purchase separate Dolby Digital or DTS decoders.
Use analog connection to enjoy audio recorded with high sampling frequencies (over
48 kHz). To protect the rights of the producers of this kind of material, this audio will
be down-sampled to 48 kHz if you use digital connection.
What you want to do
To enjoy
5.1-channel
surround sound
To enjoy stereo or
Dolby Pro Logic
How to do it
Connect to an amplifier with
5.1-channel audio input
terminals. (➡ page 29)
Connect digitally and use the
decoder in another piece of
equipment. (➡ page 30)
Connect to an analog
amplifier or system
component. (➡ page 31)
Connect to a digital amplifier
or system component.
(➡ page 31)
Digital connection
Analog connection
Digital connection
Analog connection
Settings (➡ pages 41–43)
Speaker setting
Select “Multi-channel”.
PCM Down Conversion
Dolby Digital
DTS Digital Surround
Change the settings to suit
the equipment you connect.
Make the speaker settings on
the amplifier or decoder.
Speaker setting
Select “2-channel.”
PCM Down Conversion
Change the settings to suit
the equipment you connect.
Dolby Digital
DTS Digital Surround
Select “PCM”.
∫ Other uses
Recording to MDs or cassette tapes (➡ page 34).
Note
≥The equipment connections described are examples.
≥Peripheral equipment and optional cables sold separately unless otherwise indicated.
≥Before connection, turn off all equipment and read the appropriate operating instructions.