Filter
Top Products
Advanced Operations
27
RQT6025
Note
A-B repeat play (DVD) and repeat play do not work if the disc’s elapsed play time is not
shown on the LCD.
Icon
RAM
CDVCD
DVD-V
DVD-A
–––
Content
Play mode display
---: Normal play PGM: Program play
RND: Random play ALL: All group play ( )
Marker
You can mark up to 5 positions to play again.
[ENTER] (The unit is now ready to accept markers.)
To mark a position: [ENTER] (at the desired point)
You can mark up to 999 positions to play again.
[ENTER] (The unit is now ready to accept markers.)
To mark a position: [1] to highlight the first marker (¢), then press
[ENTER] at the desired point.
If places have been marked (for example, with a DVD-RAM recorder),
these markers are displayed.
≥To mark other positions
≥
≥Use [1], then press [ENTER] at the desired point.
≥ (to mark the eleventh point and beyond)
≥While the marker icon is highlighted, first select the group of 10.
≥1. Use [2, 1] to highlight the marker pin icon.
≥2. Use [3, 4] to select 11–20 (you can select the next group of
≥2. 10 when the current group is full).
≥To recall a marker: [2, 1]➡[ENTER]
≥To erase a marker: [2, 1]➡[CANCEL]
≥This feature only works if the elapsed playing time of the disc is
≥shown (➡ Time, page 24).
≥All the markers added with this unit are cleared when the unit is
≥switched to standby or the disc lid is opened.
≥This feature doesn’t work while using a play list.
≥The markers are ordered by time. This means that the marker
≥numbers can change when you add and erase markers.
≥You can clear existing markers, but they are restored when you
≥open the disc lid or switch the unit to standby.
RAM
Note
RAM
CDVCDDVD-VDVD-ARAM
RAM
CDVCDDVD-VDVD-A
DVD-A
CDVCDDVD-A
1 2 3 ✱✱
Marker
1 10
1 2 3 4 5 6 7 8 9 10
Marker pin icon
Marker icon