Filter
Top Products
24
RQT7932
Cassette tapes — Play and Recording
Cassette tapes — Play and Recording
Play
1
Press to open and insert a cassette.
Make sure that the cassette is fully inserted and close
the lid by hand.
Side to be played back
facing up.
Insert the cassette with the
exposed tape facing you.
2
Start play.
• To play the other side of the tape,
turn the tape over and restart play.
Use normal position tapes.
High position and metal position tapes can be played, but the unit is not
able to do full justice to the characteristics of these tapes.
• Tapes exceeding 100 minutes are thin and can break or get caught in
the mechanism.
• Tape slack can get caught up in the mechanism and should be wound
up before the tape is played.
• Endless tapes can get caught up in the deck’s moving parts if used
incorrectly.
;
Fast-forward and
rewind
(while stopped)
Finding the
beginning of a
track (TPS: Tape
Program Sensor)
(during play)
TPS finds the beginning of a track and
resumes play from there. Each press
increases the number of tracks skipped, up to
a maximum of 9.
TPS may not operate correctly in the following situations:
• If the interval between tracks is less than 4 seconds
• If there is noise between tracks
• If there are silent parts within tracks
Volume adjustment
Stop
Cassette tape selection and care
SCPM91D-Pbook.indb 24 3/17/2005 11:55:44 AM