Panasonic LQ-DRM200 DVD Player User Manual


 
24
RQT7237
Timer recording
Timer recording
[RAM] [DVD-R]
This is a simple way of specifying a time to stop recording when you
are in a hurry or before you go to bed.
During recording
Press [¥, REC] to select the recording time.
Each time you press the button:
0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00
^"" Counter (cancel) !" 4:00 ,""}
For your reference
Press [STATUS] to show the time remaining until recording finishes.
This does not work during timer recordings or while using Flexible
Recording (page 15).
Recording stops and the set time is cleared if you press [].
The set time is cleared if you change the recording mode or chan-
nel while recording is paused.
Preparation
Ensure the clock (and guide channels for VCR Plusr recording,
page 8) are set correctly.
Release protection (cartridge page 10, disc page 38) before
proceeding. [RAM]
Entering VCR Plusi codes is an easy way of programming the unit
for recording. You can find these codes in newspapers and maga-
zines. You can enter up to 16 programs up to a month in advance.
1 Press
[VCR Plusr].
2 Press the numbered buttons to enter
the VCR Plusr code.
Press [2] to move
back to correct a
digit.
3 Press [ENTER].
Confirm the program and make corrections if necessary using
[3, 4, 2, 1].
“Invalid Entry” is displayed when you enter the wrong code.
Reenter the code.
To change the recording mode
Press [REC MODE].
To enter the title of the program
Press [2, 1] to select “Enter Title” and press [ENTER]
(page 27).
Repeat steps 1–3 to program other recordings.
4 Press [RETURN].
The timer recording list disappears and the message “TURN
RECORDER OFF FOR TIMER RECORDING.” is shown on
the television.
5 Press [Í, DVD POWER].
Ensure “F” lights on the unit’s display.
Specify a time to stop recording
DVD
TV
INPUT SELECT
VCR Plus+
OPEN/CLOSE
TV/VIDEO
CH
VOLUME
SKIP
DIRECT NAVIGATOR
PLAY LIST
TOP MENU
ENTER
MENU
FUNCTIONS
RETURN
STOP
PAU S E
PLAY/x1.3
SLOW/SEARCH
CANCEL
123
DVD TV
4
5
6
789
0
100
FRAME
CM SKIP TIME SLIP
ERASE
REC
PROG/CHECK
ADD/DLT
F Rec
REC MODE
STATUS
MARKER
AUDIO
SETUP
DISPLAY
POSITION
MEMORY
POWER
3, 4, 2, 1
ENTER
Í, DVD POWER
VCR Plus+
PROG/CHECK
STATUS
RETURN
¥, REC
REC MODE
Numbered
buttons
e.g.,
Using VCR Plusr codes to make timer
recordings
No.
1:58 SP
VCR Plusi
Remaining Recording Time
3/26 TUE12:53 PM
Enter PLUS CODE Number by using 0–9 key.
1:58 SP
Remaining Recording Time
3/26 TUE12:53 PM
VCR Plusi
1
2
1
2
12
1 2
SP5:10 PM4:20 PM39 4 / 1 MON01
MODE
OFFONNo
CHANNEL
DATE
1:58 SP
TIMER
TIMER
RECORDING
Remaining Recording Time
3/26 TUE12:53 PM
New Timer Program
Enable
CHECK
5:10 PM4:20 PM4 / 1 MON
MODE
OFFON
CHANNEL
DATE
1:58 SP
SP39
TIMER
RECORDING
Remaining Recording Time
3/26 TUE12:53 PM
3
4
Enter Title
The current
recording mode
(shown on the
unit’s display) is
automatically
selected.
When you press [ENTER]
Displayed if the
recording can fit
in the remaining
space on the
disc.